Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 90 No Spkr or Output Transf.
#3

OK, will do. I simulated having a 10 uF cap right on the input to the power supply filter (right onto the 80 filament), then 1.5K then 22 uF to ground, then another 1.5k and then another 22 uF.

The simulator showed very low ripple like 40mv pp.

I suppose I could back off the 22uf's to 10 uf's and increase the
ripple a bit but decrease the overall capacitance that has to charge.

I figure with a total of 3K resistance in there it should limit the current
that the 80 has to supply upon power up.

I should check in my simulator what the peak current is under these
conditions and make sure it is not too high.

The 80 Rect datasheet gives a typical capacitance of 10 uF for a
capacitor input filter so I figure that part is OK. It's the additional
R's with C's that I suppose could be a problem.

Herb S.


Messages In This Thread
Philco 90 No Spkr or Output Transf. - by hsusmann - 04-16-2014, 04:01 PM
RE: Philco 90 No Spkr or Output Transf. - by hsusmann - 04-16-2014, 05:03 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
462ron
Hi Howard, if memory serves, and many times it doesn’t, I vaguely remember working on a Philco that had that pin you hav...462ron — 09:00 AM
Gloritone 27 Radio
Hello John, Thanks for the information and Arran I have heard of Wells Gardner and I have heard of Apex but I did not ...radiorich — 08:17 AM
Gloritone 27 Radio
Another make I have seen from U.S Radio and Television was Apex Electric, or U.S Apex, the badge on some of those had a ...Arran — 12:56 AM
Philco 46-480 Electronic Restoration
I’ve consulted a couple of the books which I got from Jim Koehler, Elements of Radio Servicing (Marcus and Levy, 1947) a...jrblasde — 10:58 PM
Gloritone 27 Radio
Richard, Radiotrope was one of the many nameplates coming out of the Marion, Indiana U.S. Radio and Television Corp plan...Eliot Ness — 10:12 PM
[split] New member...
Oh... That link is gold man! Thank you so much. I'll see if I can get this thing fixed and will post the results on...HowardWoodard — 08:10 PM
[split] New member...
Gosh. I always re-discovered how to do it, took me 2-3 minutes every time. Now that I think of it, the c-clip is there b...morzh — 07:17 PM
38-690 Gill Cloth
Yeah, this one is not a chevron pattern. Ask Mike Katz, if he has something that is similar.morzh — 07:02 PM
38-690 Gill Cloth
Hi Folks, Is anyone currently selling a good reproduction of the 38-890 grill cloth? Thanks Stevetargeteye — 06:57 PM
[split] New member...
@morzh: As you can see from the pics I included, there is no clip where the vernier shaft comes out of the brass coarse ...HowardWoodard — 06:56 PM

[-]
Who's Online
There are currently 2505 online users. [Complete List]
» 4 Member(s) | 2501 Guest(s)
AvatarAvatarAvatarAvatar

>