Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 84B Power Transformer
#57

You guys are awesome! - After the IF repair, which helped the most, the reception was further boosted by a replacement 77 (thanks Terry) and I'm getting clear stations across the dial, after I realigned again today. The IF aligned well, but the final regeneration adjustment was a bit confusing. I could barely hear a squeal and it was across all settings, so I never really knew when to back off. I'm not sure if at this point it really matters since I'm getting about 12 clear channels. I also added a 40 ft antenna which helped further boost the signal. The only thing that suks is the one channel my daughter listens to is completely mixed with another channel and starts to squeal when I put it on...of course the only channel with music. Luckily, we can hear the gospel on 2 or 3 channels...LOL. Thanks again guys for all of your support. I will now set off on my next adventure which is restoring a gorgeous 90 I found. I'm sure you'll be hearing from me again soon-


Messages In This Thread
Philco 84B Power Transformer - by bdi1976 - 04-18-2014, 10:56 AM
RE: Philco 84B Power Transformer - by Mondial - 04-18-2014, 12:37 PM
RE: Philco 84B Power Transformer - by vinzer - 04-18-2014, 01:31 PM
RE: Philco 84B Power Transformer - by bdi1976 - 04-18-2014, 06:14 PM
RE: Philco 84B Power Transformer - by morzh - 04-18-2014, 06:28 PM
RE: Philco 84B Power Transformer - by gregb - 04-18-2014, 06:30 PM
RE: Philco 84B Power Transformer - by bdi1976 - 04-18-2014, 07:54 PM
RE: Philco 84B Power Transformer - by bdi1976 - 04-18-2014, 07:56 PM
RE: Philco 84B Power Transformer - by gregb - 04-18-2014, 08:07 PM
RE: Philco 84B Power Transformer - by bdi1976 - 04-18-2014, 08:45 PM
RE: Philco 84B Power Transformer - by vinzer - 04-18-2014, 08:56 PM
RE: Philco 84B Power Transformer - by gregb - 04-18-2014, 09:44 PM
RE: Philco 84B Power Transformer - by bdi1976 - 04-18-2014, 11:20 PM
RE: Philco 84B Power Transformer - by gregb - 04-18-2014, 11:27 PM
RE: Philco 84B Power Transformer - by bdi1976 - 04-18-2014, 11:57 PM
RE: Philco 84B Power Transformer - by gregb - 04-19-2014, 12:23 AM
RE: Philco 84B Power Transformer - by bdi1976 - 04-19-2014, 09:33 AM
RE: Philco 84B Power Transformer - by bdi1976 - 04-19-2014, 09:37 AM
RE: Philco 84B Power Transformer - by bdi1976 - 04-19-2014, 09:43 AM
RE: Philco 84B Power Transformer - by gregb - 04-19-2014, 11:05 AM
RE: Philco 84B Power Transformer - by morzh - 04-19-2014, 12:09 PM
RE: Philco 84B Power Transformer - by Steve Davis - 04-19-2014, 12:19 PM
RE: Philco 84B Power Transformer - by gregb - 04-19-2014, 01:28 PM
RE: Philco 84B Power Transformer - by bdi1976 - 04-19-2014, 08:15 PM
RE: Philco 84B Power Transformer - by Steve Davis - 04-19-2014, 08:49 PM
RE: Philco 84B Power Transformer - by bdi1976 - 04-19-2014, 09:40 PM
RE: Philco 84B Power Transformer - by bdi1976 - 04-19-2014, 09:43 PM
RE: Philco 84B Power Transformer - by vinzer - 04-19-2014, 09:46 PM
RE: Philco 84B Power Transformer - by Steve Davis - 04-19-2014, 10:10 PM
RE: Philco 84B Power Transformer - by bdi1976 - 04-19-2014, 10:20 PM
RE: Philco 84B Power Transformer - by Steve Davis - 04-19-2014, 10:37 PM
RE: Philco 84B Power Transformer - by bdi1976 - 04-19-2014, 10:51 PM
RE: Philco 84B Power Transformer - by Steve Davis - 04-19-2014, 11:43 PM
RE: Philco 84B Power Transformer - by bdi1976 - 04-20-2014, 10:30 AM
RE: Philco 84B Power Transformer - by vinzer - 04-20-2014, 11:38 AM
RE: Philco 84B Power Transformer - by bdi1976 - 04-20-2014, 09:31 PM
RE: Philco 84B Power Transformer - by vinzer - 04-20-2014, 09:38 PM
RE: Philco 84B Power Transformer - by Mondial - 04-20-2014, 09:45 PM
RE: Philco 84B Power Transformer - by bdi1976 - 04-20-2014, 11:09 PM
RE: Philco 84B Power Transformer - by vinzer - 04-21-2014, 11:33 AM
RE: Philco 84B Power Transformer - by bdi1976 - 04-21-2014, 03:12 PM
RE: Philco 84B Power Transformer - by vinzer - 04-21-2014, 03:17 PM
RE: Philco 84B Power Transformer - by bdi1976 - 04-21-2014, 03:48 PM
RE: Philco 84B Power Transformer - by vinzer - 04-21-2014, 05:07 PM
RE: Philco 84B Power Transformer - by morzh - 04-21-2014, 08:17 PM
RE: Philco 84B Power Transformer - by bdi1976 - 04-21-2014, 10:50 PM
RE: Philco 84B Power Transformer - by bdi1976 - 04-22-2014, 08:52 AM
RE: Philco 84B Power Transformer - by vinzer - 04-22-2014, 11:55 AM
RE: Philco 84B Power Transformer - by morzh - 04-22-2014, 12:10 PM
RE: Philco 84B Power Transformer - by bdi1976 - 04-24-2014, 01:22 PM
RE: Philco 84B Power Transformer - by morzh - 04-24-2014, 01:47 PM
RE: Philco 84B Power Transformer - by bdi1976 - 04-24-2014, 07:21 PM
RE: Philco 84B Power Transformer - by vinzer - 04-24-2014, 07:52 PM
RE: Philco 84B Power Transformer - by Radioroslyn - 04-24-2014, 08:29 PM
RE: Philco 84B Power Transformer - by bdi1976 - 04-25-2014, 10:38 AM
RE: Philco 84B Power Transformer - by vinzer - 04-25-2014, 01:33 PM
RE: Philco 84B Power Transformer - by bdi1976 - 04-26-2014, 07:43 PM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
462ron
Hi Howard, if memory serves, and many times it doesn’t, I vaguely remember working on a Philco that had that pin you hav...462ron — 09:00 AM
Gloritone 27 Radio
Hello John, Thanks for the information and Arran I have heard of Wells Gardner and I have heard of Apex but I did not ...radiorich — 08:17 AM
Gloritone 27 Radio
Another make I have seen from U.S Radio and Television was Apex Electric, or U.S Apex, the badge on some of those had a ...Arran — 12:56 AM
Philco 46-480 Electronic Restoration
I’ve consulted a couple of the books which I got from Jim Koehler, Elements of Radio Servicing (Marcus and Levy, 1947) a...jrblasde — 10:58 PM
Gloritone 27 Radio
Richard, Radiotrope was one of the many nameplates coming out of the Marion, Indiana U.S. Radio and Television Corp plan...Eliot Ness — 10:12 PM
[split] New member...
Oh... That link is gold man! Thank you so much. I'll see if I can get this thing fixed and will post the results on...HowardWoodard — 08:10 PM
[split] New member...
Gosh. I always re-discovered how to do it, took me 2-3 minutes every time. Now that I think of it, the c-clip is there b...morzh — 07:17 PM
38-690 Gill Cloth
Yeah, this one is not a chevron pattern. Ask Mike Katz, if he has something that is similar.morzh — 07:02 PM
38-690 Gill Cloth
Hi Folks, Is anyone currently selling a good reproduction of the 38-890 grill cloth? Thanks Stevetargeteye — 06:57 PM
[split] New member...
@morzh: As you can see from the pics I included, there is no clip where the vernier shaft comes out of the brass coarse ...HowardWoodard — 06:56 PM

[-]
Who's Online
There are currently 2505 online users. [Complete List]
» 4 Member(s) | 2501 Guest(s)
AvatarAvatarAvatarAvatar

>