Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

I keep buying consoles
#11

No, Deforest Crosley, had sets with an inclined control panel for at least three years before Philco introduced it, the highers end Rogers models had a flip over, rolling pin, type dial from 1935-38. This set is a 1935-36 model, the schematic is dated August 9, 1935, yes, Wales is the model, most Deforest-Crosley sets had names from the late 1920s onward, even low end ones. Even so there were other brand that built sets with inclined control panels before Philco, American Bosch had a number of consoles built with this feature.
Rogers cabinets were usually made by Knechtel or by Strathroy Furniture, some Rogers built sets also used McLagan built cabinets. I've never heard of Beaver Furniture, but then again Rogers didn't have their own cabinet shops so they likely contacted with whoever could supply what they wanted. In terms of rarity I would guess that they did sell a fair number of them as I saw one on craigslist in the Vancouver area the year before last, with veneer damage to the top, a nine tube model was at the upper middle end in terms of their offerings, the top models had 12 tubes, and there were 10 and 11 tube models inbetween.
Regards
Arran


Messages In This Thread
I keep buying consoles - by Dan Walker - 06-02-2014, 12:19 AM
RE: I keep buying consoles - by Arran - 06-02-2014, 02:44 AM
RE: I keep buying consoles - by PhilcoJohn - 06-02-2014, 07:11 AM
RE: I keep buying consoles - by Eliot Ness - 06-02-2014, 07:58 AM
RE: I keep buying consoles - by Dan Walker - 06-02-2014, 10:08 AM
RE: I keep buying consoles - by AJboy123 - 06-02-2014, 05:46 PM
RE: I keep buying consoles - by Arran - 06-03-2014, 12:01 AM
RE: I keep buying consoles - by PhilcoJohn - 06-03-2014, 07:53 AM
RE: I keep buying consoles - by y2kbruce - 06-03-2014, 04:47 PM
RE: I keep buying consoles - by Dan Walker - 06-03-2014, 07:45 PM
RE: I keep buying consoles - by Arran - 06-03-2014, 11:08 PM
RE: I keep buying consoles - by Dan Walker - 06-05-2014, 12:23 AM
RE: I keep buying consoles - by Michael Dennis - 06-05-2014, 10:08 AM
RE: I keep buying consoles - by TA Forbes - 06-06-2014, 10:42 AM
RE: I keep buying consoles - by Gene Pederson - 06-17-2014, 12:58 PM
RE: I keep buying consoles - by Dan Walker - 06-19-2014, 12:37 AM
RE: I keep buying consoles - by gregb - 06-19-2014, 10:12 AM
RE: I keep buying consoles - by Dan Walker - 06-19-2014, 10:21 AM
RE: I keep buying consoles - by Dan Walker - 06-19-2014, 06:55 PM
RE: I keep buying consoles - by Arran - 06-20-2014, 02:18 AM
RE: I keep buying consoles - by Dan Walker - 06-26-2014, 12:35 AM
RE: I keep buying consoles - by Steve Davis - 06-26-2014, 07:36 AM
RE: I keep buying consoles - by Geoff - 06-27-2014, 07:21 PM
RE: I keep buying consoles - by morzh - 06-27-2014, 08:41 PM
RE: I keep buying consoles - by Dan Walker - 06-27-2014, 10:32 PM
RE: I keep buying consoles - by PhilcoJohn - 07-04-2014, 06:35 AM
RE: I keep buying consoles - by Dan Walker - 07-04-2014, 11:19 AM
RE: I keep buying consoles - by Diverted - 07-25-2014, 05:26 PM
RE: I keep buying consoles - by jerryhawthorne - 07-26-2014, 05:47 PM



Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
462ron
Hi Levi, here’s just a thought. Most radios run the oscillator higher than the dial setting. Say you set your radio to 1...462ron — 10:10 AM
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM

[-]
Who's Online
There are currently no members online.

>