Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

What's your most annoying repair you commonly see?
#7

One thing we usually lose sight of is that when our radios were in everyday use, and needed to be fixed, some of the repairs we speak of now, were perfectly acceptable. The radio wasn't expected to go more than 7 0r 8 years, then trashed. So, however the fix was executed, it was OK, because it did the job. I was one of those techs of ancient days, because I worked in a radio shop, on a bench, during WW II. Fortunately, we didn't repair sets with new components dangling from the chassis, nor bridge bad filter condensers with new tubulars. The boss taught us that the open electrolytic could change its mind some day, and become shorted. But remember that in those days, the screw mount aluminum can electrolytics were still in the catalogues, so in the better shops (ours was), screw base got replaced with screw base.

The sets that were the ones most dreaded were intermittents or "faders" (not to be confused with Fada). They were (are) foxy, and defied any attempt to isolate a bad component. Nowadays, intermittents aren't much of a problem, because all capacitors are replaced. and whatever may have been intermittently bad, is removed, anyway.

Sort of amusing even that I like RCA sets as much as Philco, but RCA used the worst junkiest cpacitors in their sets that anyone ever even came close to. They were in little cardboard tubes with a drop of tar in each end, and literally came apart in the set. Those were the only intermittents that were easy to trouble shoot.Almost any tubular cap in the set was falling apart, and we did have customers where they let us totally re-cap a 3 year old radio! There was no other way out.

Probably, the bakelite (note that spelling!) block capacitors that Philco was famous for, don't really bother me. They were tie points when the set was designed, and while new terminal strips can be a neat replacement, I do like ti re-gut the bakelite blocks, more to preserve the appearance oif the chassis, than anything else.

The issue of re-stuffing tubular caps is, to me, a process of shoveling manure against the tide. Even if a radio is to be judged in a contest, judges can't see the craftsmanship beneath the chassis, so I see it as an exercise in futility. When you have as many artifacts as I have (besides radios), I just can't see myself, consuming time with labor that produces satisfaction or acclaim to nobody beyond myself.


Messages In This Thread
[No subject] - by Doug Houston - 07-29-2008, 04:54 PM
[No subject] - by Terry Judkins - 07-29-2008, 05:02 PM
[No subject] - by Texasrocker - 08-08-2008, 12:04 AM
[No subject] - by Terry Judkins - 08-08-2008, 08:46 AM
[No subject] - by Texasrocker - 08-09-2008, 01:44 AM
[No subject] - by Doug Houston - 08-16-2008, 10:07 PM
Cap blocks removed - by AI2V - 08-17-2008, 06:10 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM
RCA 15X
Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM
Philco 91 Schematic
Hi Dan, I can't explain this specific resistor but I have seen the use of a switch to apply B+ voltage to screen gri...RodB — 09:36 PM
6TPZ and 5TPO Radio Help
I suspect it's been repaired before. And I suspect whoever repaired it, wanted to re-use old transistors' pin stubs in o...morzh — 09:24 PM

[-]
Who's Online
There are currently 10128 online users. [Complete List]
» 2 Member(s) | 10126 Guest(s)
AvatarAvatar

>