Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Model 86
#1

Hi;
Just bagged a 1929 model 86. This is 85 years OLD!!!
Does anybody have any info on this that has a parts list and pinouts and ohms resistance on the transformers, and parts location etc. What is the B+ voltage suppose to be?
Also this has a combo resistor/capacitor coils part 7, 12,17..never seen that. Can you restuff that?
Also,,, what is inside the 2 capacitor cans? .....The smaller one is soldered shut..... Can you open it and restuff ?..... Also the larger one....what's inside that big box? Tar? Is it hard to remove?
Can you restuff that one too?
Just need some help before I start this project. Heres some pics. Bought on Craigslist for $40
http://s270.photobucket.com/user/lowellv...sort=3&o=0[/img]
http://s270.photobucket.com/user/lowellv...sort=3&o=8[/img]
http://s270.photobucket.com/user/lowellv...sort=3&o=1[/img]

Thanks,
Buzz


Messages In This Thread
Philco Model 86 - by Buzz - 07-06-2014, 07:23 PM
RE: Philco Model 86 - by morzh - 07-06-2014, 07:26 PM
RE: Philco Model 86 - by Buzz - 07-06-2014, 07:28 PM
RE: Philco Model 86 - by morzh - 07-06-2014, 07:31 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM

[-]
Who's Online
There are currently 7869 online users. [Complete List]
» 3 Member(s) | 7866 Guest(s)
AvatarAvatarAvatar

>