Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Grundig 5008
#2

Art

Those are as much as tube radios as any Philco.
You will likely encounter a Selenium penal-box type rectifier. It might be still good.
Other than the dial pointer being this belt-pulley concoction.....nothing special.

And (good news) - no caps to re-stuff. And (likely) the only ones needing replacements could be the lytics (I would check the paper caps in case they did go bad but likely not, those are newer types. But even if they are). Lots of caps will be molded mica types, possibly some oil.....those are good.

And them Grundigs sound very good for their table size...sometimes surprisingly good.

Pots will be scratchy, both tone control and volume. Keys switching bands might need lubrication, plus they often crack.
Depending on which eye tube they use...vertical miniature type or old 6E5 style....you might have to purchase that one.


Unless it was abused I do not see a huge project.


Messages In This Thread
Grundig 5008 - by Art Hoch - 07-16-2014, 11:51 AM
RE: Grundig 5008 - by morzh - 07-16-2014, 04:26 PM
RE: Grundig 5008 - by Art Hoch - 07-16-2014, 06:08 PM
RE: Grundig 5008 - by morzh - 07-16-2014, 08:46 PM
RE: Grundig 5008 - by Art Hoch - 07-20-2014, 09:14 AM
RE: Grundig 5008 - by Arran - 07-20-2014, 02:04 PM
RE: Grundig 5008 - by Art Hoch - 07-20-2014, 03:54 PM
RE: Grundig 5008 - by codefox1 - 07-20-2014, 10:13 PM
RE: Grundig 5008 - by Art Hoch - 07-20-2014, 11:27 PM
RE: Grundig 5008 - by gregb - 07-20-2014, 11:41 PM
RE: Grundig 5008 - by morzh - 07-20-2014, 11:48 PM
RE: Grundig 5008 - by Arran - 07-21-2014, 03:26 AM
RE: Grundig 5008 - by Art Hoch - 07-21-2014, 11:19 PM
RE: Grundig 5008 - by Art Hoch - 07-22-2014, 12:44 PM
RE: Grundig 5008 - by Art Hoch - 07-26-2014, 05:43 PM
RE: Grundig 5008 - by Art Hoch - 07-28-2014, 08:00 PM
RE: Grundig 5008 - by morzh - 07-28-2014, 11:05 PM
RE: Grundig 5008 - by Art Hoch - 07-29-2014, 11:18 AM
RE: Grundig 5008 - by morzh - 07-29-2014, 12:10 PM
RE: Grundig 5008 - by Art Hoch - 07-30-2014, 05:34 PM
RE: Grundig 5008 - by Arran - 07-30-2014, 08:08 PM
RE: Grundig 5008 - by Art Hoch - 07-31-2014, 10:46 AM
RE: Grundig 5008 - by Art Hoch - 08-04-2014, 09:16 PM
RE: Grundig 5008 - by murf - 08-06-2014, 08:02 PM
RE: Grundig 5008 - by Art Hoch - 08-08-2014, 08:35 PM
RE: Grundig 5008 - by murf - 08-08-2014, 09:00 PM
RE: Grundig 5008 - by Art Hoch - 08-09-2014, 10:20 PM
RE: Grundig 5008 - by Art Hoch - 08-09-2014, 10:24 PM
RE: Grundig 5008 - by Ron Ramirez - 08-10-2014, 07:25 AM
RE: Grundig 5008 - by Art Hoch - 08-13-2014, 06:06 PM
RE: Grundig 5008 - by Art Hoch - 08-22-2014, 02:24 PM
RE: Grundig 5008 - by Art Hoch - 08-29-2014, 12:41 PM



Users browsing this thread: 6 Guest(s)
[-]
Recent Posts
462ron
Hi Levi, here’s just a thought. Most radios run the oscillator higher than the dial setting. Say you set your radio to 1...462ron — 10:10 AM
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM

[-]
Who's Online
There are currently 4619 online users. [Complete List]
» 1 Member(s) | 4618 Guest(s)
Avatar

>