Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

new project 48-482
#12

I am finally satisfied with my 48-482. The saga of the electronic restoration can be found in the appropriate section. I'll just say, the problem was an error on my part, a miss-wired connection of a condenser. Fixed that and the FM volume came up to what it should be. I am running this radio with just the original built in antenna, the one that has the little metal tab that wraps around the line cord. It picks up as well as any of my FM receivers now, considering the antenna, and sounds better than all but my stereo system. I can get all the local stations BOOMING in loud and clear, and some fairly distant too. Well worth all the study and effort to make this old girl sing like new again.


Messages In This Thread
new project 48-482 - by mikethedruid - 07-25-2014, 05:56 PM
RE: new project 48-482 - by klondike98 - 07-25-2014, 11:15 PM
RE: new project 48-482 - by Eric Adams - 07-26-2014, 12:10 AM
RE: new project 48-482 - by klondike98 - 07-26-2014, 08:42 AM
RE: new project 48-482 - by mikethedruid - 07-26-2014, 03:47 PM
RE: new project 48-482 - by mikethedruid - 08-05-2014, 10:05 PM
RE: new project 48-482 - by morzh - 08-05-2014, 10:44 PM
RE: new project 48-482 - by klondike98 - 08-05-2014, 11:24 PM
RE: new project 48-482 - by Eric Adams - 08-06-2014, 12:28 AM
RE: new project 48-482 - by mikethedruid - 08-06-2014, 01:13 AM
RE: new project 48-482 - by Tom Hamilton - 08-10-2014, 09:22 PM
RE: new project 48-482 - by mikethedruid - 08-19-2014, 05:35 PM
RE: new project 48-482 - by klondike98 - 08-20-2014, 11:13 AM



Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM

[-]
Who's Online
There are currently 9771 online users. [Complete List]
» 2 Member(s) | 9769 Guest(s)
AvatarAvatar

>