Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

PHILCO 98 EXPORT Model
#21

Hi Willie,

Now that Model 98 was not sold in the USA, but is very similar to model 97 which was sold here.

Main differences:
Model 97 has standard broadcast (AM), called medium wave or MW across the pond, plus two shortwave bands.
Model 98 has long wave, standard broadcast (AM or MW) and one shortwave band.

Both use seven tubes, and the chassis layout is the same. Model 97 was designed for use on our 110-115 volt mains.

--
Ron Ramirez
Ferdinand IN


Messages In This Thread
PHILCO 98 EXPORT Model - by HOTWIRE - 10-08-2012, 01:50 PM
RE: PHILCO 98 EXPORT Model - by TA Forbes - 10-08-2012, 10:33 PM
RE: PHILCO 98 EXPORT Model - by HOTWIRE - 10-13-2012, 09:44 AM
RE: PHILCO 98 EXPORT Model - by HOTWIRE - 10-13-2012, 09:53 AM
RE: PHILCO 98 EXPORT Model - by TA Forbes - 10-14-2012, 08:55 AM
RE: PHILCO 98 EXPORT Model - by Ron Ramirez - 10-14-2012, 09:17 AM
RE: PHILCO 98 EXPORT Model - by Ron Ramirez - 10-14-2012, 11:01 AM
RE: PHILCO 98 EXPORT Model - by TA Forbes - 10-14-2012, 09:26 PM
RE: PHILCO 98 EXPORT Model - by Arran - 10-14-2012, 11:02 PM
RE: PHILCO 98 EXPORT Model - by HOTWIRE - 10-15-2012, 03:18 PM
RE: PHILCO 98 EXPORT Model - by Ron Ramirez - 10-15-2012, 04:23 PM
RE: PHILCO 98 EXPORT Model - by HOTWIRE - 10-15-2012, 07:18 PM
RE: PHILCO 98 EXPORT Model - by HOTWIRE - 03-12-2013, 11:27 AM
RE: PHILCO 98 EXPORT Model - by Ron Ramirez - 03-15-2013, 02:04 PM
RE: PHILCO 98 EXPORT Model - by HOTWIRE - 03-15-2013, 11:14 PM
RE: PHILCO 98 EXPORT Model - by Ron Ramirez - 03-17-2013, 01:08 PM
RE: PHILCO 98 EXPORT Model - by HOTWIRE - 03-19-2013, 09:09 AM
RE: PHILCO 98 EXPORT Model - by HOTWIRE - 09-09-2014, 06:02 PM
RE: PHILCO 98 EXPORT Model - by HOTWIRE - 09-09-2014, 06:06 PM
RE: PHILCO 98 EXPORT Model - by HOTWIRE - 09-09-2014, 06:13 PM
RE: PHILCO 98 EXPORT Model - by Ron Ramirez - 09-09-2014, 06:47 PM
RE: PHILCO 98 EXPORT Model - by HOTWIRE - 09-09-2014, 08:19 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM
RCA 15X
Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM

[-]
Who's Online
There are currently no members online.

>