[morzh]

Aligned it, at 1400 kHz. The dial is still a bit off but I am not gonna fret over it.
Done.

The last thing is empty the can and put it back.

PS. there was a hum, came and went, depending on the chassis twisting etc.
I thought of those rivets, but ventually it happened to be some loose connections in the 27 tube socket.
Tightened, put some Deoxit on them with a cotton swab...gone.

I hope this is it...the can will wait for me to come up with a clean way of emptying it....the big bolt and heavy vice worked on 111 but still too much debris......