Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

For a novel...A suggestion of a Canadian Philco Console from the 30s-40s?
#2

Well, any nice old console could be fitted with an FM tuner that could be kept out of sight, and would play nicely. And you could blend the stereo outputs into mono, or operate whatever in mono mode. Even a modest little FM radio could be made to do this job, and provided the proper remote antenna was arranged, it would play just fine in the basement. And if you're talking about converting an old set that tuned the original FM band vs current one, yeah it's been done, although I've not tried it myself.
Also quite a few have gone to little home based modulators that can tke whatever (AM/FM/Tape/CD/Computer) audio input and create your own home (very limited range) AM radio station.

So far as which vintage model you might like, well this forum as well as others have lots of pictures, descriptions, and other information available. Well, anyway, you can narrow your search to the appropriate vintage if you care to be quite particular.

You can also get a rough idea of what they might set you back on the net or places like Ebay or Craig's list. In a lot of cases, the cost of packaging and transporting larger sets can easily double or triple the intrinsic value, and proper restoration inside and out is also an issue, but if you find a gem and a willing seller, I'd say best bet might be a piano mover, and clarify delivery instructions, like inside delivery, which floor, etc... Restoration is another matter, mostly senior local hobbiests with a little spare time for the "guts" and furniture restorers for the outside.

Also, if you are able or have a willing recruit, scout around the thrift shops, yard sales, and yeah, trash night in your area -- you never know! Happy hunting and best of luck with your book!





Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM

[-]
Who's Online
There are currently no members online.

>