Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

For a novel...A suggestion of a Canadian Philco Console from the 30s-40s?
#8

Hello Rose.

I am located near Montréal, Québec.
And I am the proud owner of a restaured Philco 47-1230 - that used to be top-of-the-line back in 1947.

Canada had canadian model philco, but also US ones. Sometimes the canadian models were almost identical to american ones too. But, Philco of Canada was made mainly to help with canadian supply, not be the only supplier of Philco Radio.

That being said, the radio I have is a US model 47-1230 but was sold in canadian soil somewhere in Montreal in the late 40s.
I specify that model mainly because it had a great sound, with its amp design being still very similar to what you see on modern tube amps (such as modern hybrid guitar amps) and also because it has the "modern" FM

- I listend to hockey and music on my "stock" (restaured) philco, with no modifications.
The 47-1230 had AM, FM, Shortware and a 78rpm record changer.
If you want to have a radio that is majestic, top of the line, have good audiophonics and be suitable for a listening room, it could be a good model for that.

here's a picture of my radio pre-restauration
[Image: http://www.radiomuseum.org/images/radio/...019191.jpg]

There are other canadian-based radio company such as Addison, Marconi or RCA/Victor but most radios were smaller sized and lesser tube count; for a "listening room" quality radio, I'd think you prefer higher-end?

-Mars





Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM

[-]
Who's Online
There are currently 5312 online users. [Complete List]
» 5 Member(s) | 5307 Guest(s)
AvatarAvatarAvatarAvatar
Avatar

>