37-9 loudspeaker impedance

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

37-9 loudspeaker impedance

morzh
Odobenus rosmarus

Posts: 16,217
Threads: 562
Joined: Oct 2011
City: Jackson State, Province, Country: NJ

10-21-2014, 02:25 PM

This is totally wrong resistance, if anything its should be on the order of 1 Ohm to few Ohms.
Are you sure you are measuring what you think you are measuring?
If it were a needle drive speaker.....maybe, but this is a regular electrodynamic job with an output transformer.

Find

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

37-9 loudspeaker impedance - by Audiodoctor - 10-21-2014, 02:05 PM

RE: 37-9 loudspeaker impedance - by morzh - 10-21-2014, 02:25 PM

RE: 37-9 loudspeaker impedance - by Chuck Schwark - 10-21-2014, 03:10 PM

RE: 37-9 loudspeaker impedance - by Ron Ramirez - 10-21-2014, 03:52 PM

RE: 37-9 loudspeaker impedance - by Audiodoctor - 10-22-2014, 12:48 PM

RE: 37-9 loudspeaker impedance - by Audiodoctor - 10-22-2014, 01:14 PM

RE: 37-9 loudspeaker impedance - by morzh - 10-22-2014, 02:30 PM

View a Printable Version

Users browsing this thread: 2 Guest(s)

Recent Posts
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM

Who's Online

There are currently 9310 online users. [Complete List]
» 3 Member(s) | 9307 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me