The Philco 39-30 progress

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

The Philco 39-30 progress

philconerd
Member

Posts: 60
Threads: 14
Joined: Oct 2008
City: Pequot Lakes, MN

12-15-2014, 01:09 PM

No, the sig generator does not pass thru on the broadcast band or SW band.

I just found my wiring error on the band switch on the AVC Line. I put the .05 cap on the wrong location on the switch to ground. This happened while I replaced the rubber wiring and capacitor on the band switch.

So, I have to pull the band switch back out of the chassis and move the .05 cap to the correct terminal. That band switch is a pain to work around!

G.

Find

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

The Philco 39-30 progress - by philconerd - 11-15-2014, 03:04 PM

RE: The Philco 39-30 progress - by morzh - 11-15-2014, 03:26 PM

RE: The Philco 39-30 progress - by philconerd - 11-18-2014, 11:03 AM

RE: The Philco 39-30 progress - by philconerd - 12-15-2014, 10:13 AM

RE: The Philco 39-30 progress - by morzh - 12-15-2014, 10:22 AM

RE: The Philco 39-30 progress - by philconerd - 12-15-2014, 01:09 PM

RE: The Philco 39-30 progress - by morzh - 12-15-2014, 02:30 PM

RE: The Philco 39-30 progress - by philconerd - 12-16-2014, 03:15 PM

RE: The Philco 39-30 progress - by mikethedruid - 12-17-2014, 11:22 PM

RE: The Philco 39-30 progress - by philconerd - 12-23-2014, 04:20 PM

RE: The Philco 39-30 progress - by Tom Hamilton - 12-23-2014, 10:25 PM

View a Printable Version

Users browsing this thread: 4 Guest(s)

Recent Posts
462ron
Hi Levi, here’s just a thought. Most radios run the oscillator higher than the dial setting. Say you set your radio to 1...462ron — 10:10 AM
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM

Who's Online

There are currently 5968 online users. [Complete List]
» 1 Member(s) | 5967 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me