Here we go with a Brand Z 9-S-262
Posts: 2,079
Threads: 154
Joined: Jan 2013
City: Westland, MI
A little late for this project, but if you have issues in the future with rod stock being too large a diameter for the project just chuck an end into a drill, and wrap some 320 grit sandpaper around it. Fire up the drill and hold the sandpaper tightly around the rod. Slide the sandpaper back and forth until the diameter is decreased enough. Aluminum is fairly soft, so it shouldn't take long at all to get the diameter right. Take care, Gary
"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
Messages In This Thread
RE: Here we go with a Brand Z 9-S-262 - by GarySP - 01-04-2015, 10:37 PM
Users browsing this thread: 32 Guest(s)
|
Recent Posts
|
An attempt to remove the Field Coil from a G speaker
|
Gary
I in fact did, on a 38-14, I think, where I had a speaker with the dead coil.
Well...it kinda worked. Kinda, be...morzh — 10:38 PM |
An attempt to remove the Field Coil from a G speaker
|
Mike, what ever happened to that plan you had to try using a rare earth magnet to magnetize the pole? This looks like a...GarySP — 10:25 PM |
RCA T62 is playing.....
|
Beautiful set.morzh — 09:07 PM |
An attempt to remove the Field Coil from a G speaker
|
Well....here it is.
The green stuff. Unfortunately, probably penetrates deep.
I opened the top layer and saw that:
...morzh — 08:58 PM |
Philco 91 Restore Code ??
|
:clap: :clap: :clap: :clap:
Really nice workmanship!!! Top of the chassis looks great.
Sorry about the long winded e...MrFixr55 — 08:09 PM |
Philco 40-120C Restoration
|
Thank you for your reply. I will check voltages on the other tubes, look at resistor 23 and cap 25, etc. If all else fai...bluecap — 07:58 PM |
RCA T62 is playing.....
|
Nice looking set great save. DavidDavid — 07:48 PM |
Philco 89 indicator light.
|
Hello Jim, I have done several 89s. The trick is to move the drum in or out on it's shaft. You will need to loosen a set...dconant — 07:36 PM |
An attempt to remove the Field Coil from a G speaker
|
MrFixr
Yes, it is my plan to go with 45rpm spider if I go that far.
No, the pole was not left-handed as I unscrewed ...morzh — 07:14 PM |
Philco 40-120C Restoration
|
Change the tube. Check the tube's bias network.
Are any other tubes experience the drop or just this?`
Is resistor 23 OK...morzh — 07:09 PM |
Who's Online
|
There are currently no members online. |
|

|