Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help on a GE Musiphonic
#1

I believe I have a model 432 Musiphonic from 1953 or 1954. It is to the right of the absoloutely georgeous Philco 48-464 on tha attached photo. I got them both in a package from Ebay. (The Philco was re-capped, cleaned and georgeous, I'm keeping that one.) Anyway, this little GE "mutt" is a 6 tube printed circuit dog's breakfast of a radio, but it does have a RF amp, 3 gang tuning capacitor, kind of interesting output transformer with a feedback winding, and the cabinet is perfect.

I recapped and cleaned the "mutt" (all the filter, bypass and wax caps) and I know I will have to replace the 35C5 socket, but there is an intermittent problem downstream that is shorting the B+. I tried blasting out the IF cans with Deoxit 5, and did a thorough decontamination of the pc board via mineral spirits brushed and wiped with paper towels, and left to dry for several days.

After that I was able to pull a couple of stations in, weakly, with garble and static, and current surges visable on the pilot lamp, and decided to stop before I burned the little sucker up.

The previous owner was, it seems, a rat who smoked. Now I am of a rat year (1948, and I smoke.) so that should not alone sentence this little box to death, or dismemberment to the crazy house of my spare parts.

I need a schematic, and would be very grateful if anyone has one and can make me a copy, or has tackled and won, or has tried and failed on one of these.

Thanks

Bill (AKA Codefox)


Messages In This Thread
Help on a GE Musiphonic - by codefox1 - 12-18-2008, 02:57 AM
Re: Help on a GE Musiphonic - by rghines1 - 12-18-2008, 10:16 AM
Re: Help on a GE Musiphonic - by codefox1 - 12-18-2008, 07:15 PM
Re: Help on a GE Musiphonic - by codefox1 - 12-27-2008, 07:28 PM
Re: Help on a GE Musiphonic - by rghines1 - 12-29-2008, 09:21 PM
Re: Help on a GE Musiphonic - by codefox1 - 12-31-2008, 01:48 PM
Re: Help on a GE Musiphonic - by Jim Berg - 01-04-2009, 02:03 AM
Re: Help on a GE Musiphonic - by Texasrocker - 01-04-2009, 11:51 PM
Re: Help on a GE Musiphonic - by Arran - 01-05-2009, 11:33 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Heathkit Sweep Generator TS-4
Ron Instead of Quick reply, go to New Reply, then go to the title of the very first post, and change the title text the...morzh — 02:00 PM
6TPZ and 5TPO Radio Help
I am not a specialist in car radios. I suspect they might use vibrators to convert 12V to acceptable tube voltages, so ...morzh — 01:58 PM
6TPZ and 5TPO Radio Help
Welcome to the Phorum, R3Sons! I have very limited experience with car radios other than installing custom radios back ...GarySP — 01:08 PM
462ron
OK, I need to rename this thread to say..Eico 368 TV/FM Sweep Generator instead of the current title..Heathkit Sweep Gen...462ron — 12:49 PM
6TPZ and 5TPO Radio Help
Hello, I have a Philco (Ford) 6TPZ and a 5TPO radio.  I replaced the electrolytic capacitors in both.  I have the SAMS m...R3Sons — 12:29 PM
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM

[-]
Who's Online
There are currently 5677 online users. [Complete List]
» 1 Member(s) | 5676 Guest(s)
Avatar

>