Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Original or not????
#4

 I've managed to paint around decals on Bakelite radios in the past, the trick is to very carefully strip around the perimeter of the decal, then very carefully mask over it in the same way with a high quality tape. I would not bother doing this with a decal that is readily available like a Phlilco decal though. That paint job looks terrible, it looks like someone painted it with a roller, with a thick nap.
Regards
Arran


Messages In This Thread
Original or not???? - by OldRestorer - 02-02-2015, 10:29 PM
RE: Original or not???? - by OldRestorer - 02-02-2015, 11:24 PM
RE: Original or not???? - by KCMike - 02-02-2015, 11:34 PM
RE: Original or not???? - by Arran - 02-03-2015, 01:35 AM
RE: Original or not???? - by Ron Ramirez - 02-03-2015, 07:38 AM
RE: Original or not???? - by OldRestorer - 02-03-2015, 09:10 AM
RE: Original or not???? - by Ron Ramirez - 02-03-2015, 11:15 AM
RE: Original or not???? - by OldRestorer - 02-03-2015, 12:23 PM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM

[-]
Who's Online
There are currently 7974 online users. [Complete List]
» 1 Member(s) | 7973 Guest(s)
Avatar

>