Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

So where should I start.... Philco 38-116
#5

Yes, great find, good price, no, not the best first project for a novice but then maybe you are not a novice. For someone green behind the ears it might be a bit intimidating, and even for someone more experienced who never tackled a big radio before it sure does look imposing.
The solution is as always, eat an elephant a bite at a time, do not try to imagine the whole project's scope, just start and keep going. It is not a job, there are no deadlines, might as well make it a learning thing and enjoy the ride.

Unless there is someone at your household to object to a big wooden ugly thing, I recommend starting with the chassis, as when you finish it and it sings, you will have a significant endorphine boost when it happens. Then you can tackle the cabinet knowing for sure it has a good radio to go in it.

And there are more than one person here, self included, who restored 37-116 and. 38-116 (other than cabinets they are largely the same) so you will have "mony councels sweet and mony lengthened sage advices" Icon_lol

Cheers, good luck and welcome.


Messages In This Thread
RE: So where should I start.... Philco 38-116 - by morzh - 02-05-2015, 12:11 PM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM

[-]
Who's Online
There are currently no members online.

>