Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Need place to repaint / restore a 513 cabinet
#6

 What I would suggest, before stripping the cabinet down to bare steel, is test the spray paint with some alcohol and see if it thins out or wipes off. Then, barring that, try dabbing a small section at a time with lacquer thinner and see if you can soften the paint and gently scrape it or scrub it off with 0000 steel wool. This will depend on how think the paint it of course. If the original paint finish can be salvaged with hand work that would be best, if the cabinet was stripped and repainted it basically becomes just slightly better then a Spanish Brown 511 repainted Labrador Grey, but if it's too far gone it's too far gone. Maybe investigate what a museum furniture conservator would do to get the spray paint off, they have to handle such things on a daily basis. With regard to the escucheon, as far as I know nobody has ever made reproductions of these, the original was bronze or brass, if it's aluminum looking then someone painted it that way.
Regards
Arran


Messages In This Thread
RE: Need place to repaint / restore a 513 cabinet - by Arran - 02-12-2015, 11:56 PM



Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
OK, so 18 and 19 as they should be. What is "everything else?" Try to be more specific in your descriptions:...morzh — 12:44 PM
6TPZ and 5TPO Radio Help
Yeah, I'm still on 5TPO. Sorry, my bad, points 1 and 2 should be points 18 and 19 (easy mistake  :think: )  X7 is shown ...R3Sons — 11:42 AM
Philco 40-120C Filament Wiring
Hi folks, I'm in the process of restoring a Philco 40-120C and I'm finding the wiring to be a bit puzzling. According to...bluecap — 11:28 AM
462ron
Hi Levi, here’s just a thought. Most radios run the oscillator higher than the dial setting. Say you set your radio to 1...462ron — 10:10 AM
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM

[-]
Who's Online
There are currently 6808 online users. [Complete List]
» 2 Member(s) | 6806 Guest(s)
AvatarAvatar

>