Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Transformer 32-8055M
#2

Here are the specs of the original 32-8055.

310 VCT @ 52 mA
6.3V @ 2A

It looks like the Hammond 269BX is the closest match - 300 VCT @ 86 mA; 6.3V @ 2A.

Keep in mind the Hammond will run warm to hot. I ran my Tropic 42-720 one day recently for four hours. It has a replacement Hammond transformer that is rated at double the needed current. It was quite hot after four hours.

--
Ron Ramirez
Ferdinand IN


Messages In This Thread
Transformer 32-8055M - by zfrederick - 02-16-2015, 09:32 AM
RE: Transformer 32-8055M - by Ron Ramirez - 02-16-2015, 01:34 PM
RE: Transformer 32-8055M - by codefox1 - 02-17-2015, 10:55 AM
RE: Transformer 32-8055M - by morzh - 02-17-2015, 11:07 AM
RE: Transformer 32-8055M - by zfrederick - 02-18-2015, 03:44 PM
RE: Transformer 32-8055M - by morzh - 02-18-2015, 03:51 PM
RE: Transformer 32-8055M - by zfrederick - 02-18-2015, 04:29 PM
RE: Transformer 32-8055M - by morzh - 02-18-2015, 04:41 PM
RE: Transformer 32-8055M - by Eliot Ness - 02-18-2015, 06:08 PM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM

[-]
Who's Online
There are currently 5467 online users. [Complete List]
» 1 Member(s) | 5466 Guest(s)
Avatar

>