Gilfillan 5B8

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Gilfillan 5B8

Radioroslyn
Phorum Expert

Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa

03-28-2015, 07:03 AM

Well -21v is a little high should be about -8 to- 12 v or so. Is there a cap between pin 3 of the 6Q7 and pin 5 of the 6F6? Did you replace the resistors in bias divider? Looks like they are 350 and 50 ohms off of the choke or FC. Can you see the heater glow in the 6Q7 and the 6F6? -21 shouldn't stop it from working at all. All of the other voltages look good. Could have a bad connection between the tube and it's socket. Touch pin 5 of the 6F6 should get hum.
Terry

(This post was last modified: 03-28-2015, 07:12 AM by Radioroslyn.)

Find

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

Gilfillan 5B8 - by dseverson - 03-26-2015, 02:54 PM

RE: Gilfillan 5B8 - by Radioroslyn - 03-26-2015, 06:21 PM

RE: Gilfillan 5B8 - by dseverson - 03-27-2015, 09:26 PM

RE: Gilfillan 5B8 - by dseverson - 03-27-2015, 09:30 PM

RE: Gilfillan 5B8 - by Radioroslyn - 03-27-2015, 09:48 PM

RE: Gilfillan 5B8 - by dseverson - 03-28-2015, 12:53 AM

RE: Gilfillan 5B8 - by Radioroslyn - 03-28-2015, 07:03 AM

RE: Gilfillan 5B8 - by dseverson - 03-28-2015, 08:49 PM

RE: Gilfillan 5B8 - by Radioroslyn - 03-28-2015, 09:33 PM

RE: Gilfillan 5B8 - by dseverson - 03-30-2015, 12:13 AM

RE: Gilfillan 5B8 - by Radioroslyn - 03-30-2015, 08:39 AM

RE: Gilfillan 5B8 - by dseverson - 03-30-2015, 05:54 PM

RE: Gilfillan 5B8 - by dseverson - 04-01-2015, 02:30 PM

RE: Gilfillan 5B8 - by Radioroslyn - 04-01-2015, 09:32 PM

RE: Gilfillan 5B8 - by dseverson - 04-02-2015, 05:13 PM

RE: Gilfillan 5B8 - by dseverson - 04-03-2015, 09:27 PM

RE: Gilfillan 5B8 - by Radioroslyn - 04-03-2015, 11:12 PM

View a Printable Version

Users browsing this thread: 5 Guest(s)

Recent Posts
Philco model 60
This is my thread on 60 from 2016. I had to rewind the osc coil, and I actually counted the turns and then rewound i...morzh — 03:34 PM
Philco model 60
Yes, Mark belongs to the same Michigan Antique Radio Club that I do. I suspect that the oscillator coil is in need of a ...Radios1340 — 03:10 PM
A Marconi model 86
Yeah. I am dreading the thought of what to do with all my consoles when I will no longer be able to move them around. I...morzh — 02:51 PM
1947 Silvertone 7086 Wire Recorder/Phono/Radio on YouTube
Cool gadget, Buzz. I took me a couple of second to undestand that that oscillating thing makes the wire to spool correc...morzh — 02:50 PM
A Marconi model 86
My back hurts already, you could build a house with all the wood. PaulPaul Philco322 — 02:49 PM
1947 Silvertone 7086 Wire Recorder/Phono/Radio on YouTube
Part 4 of this series now uploaded link below to anyone interested Buzz — 02:39 PM
Philco model 60
Welcome to the Phorum, Radios1340! The oscillator coil on the 60 is a common culprit. I just bought a 60B (June 1934) ...GarySP — 02:33 PM
Philco model 60
Yes, standard alignment procedure. I can get the minuscule tone to vary when adjusting the trimmers. But you almost have...Radios1340 — 01:40 PM
A Marconi model 86
An imposing-looking radio, for sure.morzh — 12:43 PM
Philco model 60
Model 60 struck again :lol: Welcome to the Phorum! Above is the article on Model 60. Could be of some use. Now...morzh — 12:38 PM

Who's Online

There are currently 10315 online users. [Complete List]
» 2 Member(s) | 10313 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me