Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

A question: old console radios manufacturing quantities
#23

Until we hear from Mike, here's an attempted translation from the admittedly imperfect Google Translate:

RadioSvit Wrote:Thank you, Joseph. Dyakuyu. Icon_biggrin

Thank you, Joseph. Dyakuyu. I am proud of my second PHILCO, which Michael helped me buy, thank him once again. Philco 37-640 and 37-116.

Philco 37-640. This device partially replace plywood (at the upper corners of the lateral walls) and reversed nail. The interrogation has not changed, but it is necessary. Very.

Philco 37-116 - a masterpiece of rationality! And it has a great sound.

Google Translate made an absolute mess of Mike's (morzh) post, and Bing Translator isn't much better:

morzh Wrote:That's not already knew that here, and in Ukrainian is spoken. Miracles... Icon_smile

Meantime, I also say (through Bing Translator) - Ласкаво просимо, Пітер!

--
Ron Ramirez
Ferdinand IN


Messages In This Thread
RE: A question: old console radios manufacturing quantities - by Ron Ramirez - 05-10-2015, 08:56 PM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM

[-]
Who's Online
There are currently no members online.

>