How to flatten wrinkled veneer?

Register

Guest Join Us

Hello Guest,

Please feel free to join us!
There are many more parts of the Phorum that only members can see.

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

How to flatten wrinkled veneer?

tab10672
Senior Member

Posts: 411
Threads: 42
Joined: Sep 2008
City: Ironton Ohio

#8

05-26-2015, 08:49 PM

The best method I have found when I'm going to refinish anyway, is after stripping, I lay a washcloth soaked with boiling hot water over the area leave it there over night to saturate the veneer, remove cloth, then clamp a flat hard surface (plywood cut to size) leave it until the wood dries. Will be flat as original without splitting or injecting for glue, has worked every time for me.

Find

« Next Oldest | Next Newest »

Messages In This Thread

How to flatten wrinkled veneer? - by Nathan Slingerland - 05-25-2015, 11:14 AM

RE: How to flatten wrinkled veneer? - by TimC - 05-25-2015, 01:57 PM

RE: How to flatten wrinkled veneer? - by sam - 05-25-2015, 02:57 PM

RE: How to flatten wrinkled veneer? - by jerryhawthorne - 05-25-2015, 05:08 PM

RE: How to flatten wrinkled veneer? - by Fred Taylor - 05-25-2015, 06:23 PM

RE: How to flatten wrinkled veneer? - by Nathan Slingerland - 05-25-2015, 09:56 PM

RE: How to flatten wrinkled veneer? - by OldRestorer - 05-26-2015, 08:14 AM

RE: How to flatten wrinkled veneer? - by tab10672 - 05-26-2015, 08:49 PM

RE: How to flatten wrinkled veneer? - by Dan Walker - 06-03-2015, 11:36 PM

RE: How to flatten wrinkled veneer? - by codefox1 - 06-11-2015, 11:08 AM

RE: How to flatten wrinkled veneer? - by tom.seeger - 08-10-2015, 11:08 PM

View a Printable Version

Users browsing this thread: 1 Guest(s)

Recent Posts
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM
RCA 15X
Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM
Philco 91 Schematic
Hi Dan, I can't explain this specific resistor but I have seen the use of a switch to apply B+ voltage to screen gri...RodB — 09:36 PM

Who's Online
There are currently no members online.