Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Grunow 654
#2

 There isn't anything wrong with Sprague Orange Drops in and of itself, but the installation was rather sloppy, the electrolytic placement seems just as bad. I would bet that whomever did the work probably just clipped the old caps out and tacked the leads of the new ones onto the old terminals without doing much else, so they will probably fall off within a few years. You could probably go in there with a soldering gun and remove most of them within 10 minutes. As for the bias cell, that really has to be there for the set to work properly, especially if it's on wiper of the volume control, if you rewire the holder so the polarity is reversed you can use a modern watch battery in it's place, or use the old cell as an adapter for the new watch battery.
Regards
Arran


Messages In This Thread
Grunow 654 - by vecher - 06-22-2015, 12:36 AM
RE: Grunow 654 - by Arran - 06-22-2015, 03:13 AM
RE: Grunow 654 - by Radioroslyn - 06-22-2015, 07:03 AM
RE: Grunow 654 - by vecher - 06-22-2015, 06:38 PM
RE: Grunow 654 - by vecher - 06-22-2015, 10:35 PM
RE: Grunow 654 - by Arran - 06-23-2015, 01:26 AM
RE: Grunow 654 - by Warren - 06-22-2015, 11:46 PM
RE: Grunow 654 - by jerryhawthorne - 06-23-2015, 12:17 AM
RE: Grunow 654 - by mikethedruid - 06-23-2015, 12:55 AM
RE: Grunow 654 - by vecher - 06-23-2015, 09:51 AM
RE: Grunow 654 - by vecher - 06-23-2015, 08:18 PM
RE: Grunow 654 - by Arran - 06-24-2015, 12:57 AM
RE: Grunow 654 - by codefox1 - 06-24-2015, 08:17 AM
RE: Grunow 654 - by vecher - 06-24-2015, 03:23 PM
RE: Grunow 654 - by Arran - 06-25-2015, 01:45 AM
RE: Grunow 654 - by jerryhawthorne - 06-24-2015, 03:50 PM
RE: Grunow 654 - by vecher - 06-24-2015, 04:14 PM
RE: Grunow 654 - by vecher - 06-26-2015, 04:57 PM
RE: Grunow 654 - by vecher - 07-04-2015, 04:52 PM
RE: Grunow 654 - by Radioroslyn - 07-04-2015, 05:58 PM
RE: Grunow 654 - by vecher - 07-04-2015, 08:57 PM
RE: Grunow 654 - by vecher - 07-04-2015, 11:37 PM
RE: Grunow 654 - by Arran - 07-05-2015, 02:12 AM
RE: Grunow 654 - by vecher - 07-05-2015, 10:51 PM
RE: Grunow 654 - by Arran - 07-06-2015, 03:06 AM
RE: Grunow 654 - by vecher - 07-06-2015, 10:05 AM



Users browsing this thread: 8 Guest(s)
[-]
Recent Posts
Philco model 60
This is my thread on 60 from 2016. I had to rewind the osc coil, and I actually counted the turns and then rewound i...morzh — 03:34 PM
Philco model 60
Yes, Mark belongs to the same Michigan Antique Radio Club that I do. I suspect that the oscillator coil is in need of a ...Radios1340 — 03:10 PM
A Marconi model 86
Yeah. I am dreading the thought of what to do with all my consoles when I will no longer be able to move them around. I...morzh — 02:51 PM
1947 Silvertone 7086 Wire Recorder/Phono/Radio on YouTube
Cool gadget, Buzz. I took me a couple of second to undestand that that oscillating thing makes the wire to spool correc...morzh — 02:50 PM
A Marconi model 86
My back hurts already, you could build a house with all the wood. PaulPaul Philco322 — 02:49 PM
1947 Silvertone 7086 Wire Recorder/Phono/Radio on YouTube
Part 4 of this series now uploaded link below to anyone interested Buzz — 02:39 PM
Philco model 60
Welcome to the Phorum, Radios1340!  The oscillator coil on the 60 is a common culprit.  I just bought a 60B (June 1934) ...GarySP — 02:33 PM
Philco model 60
Yes, standard alignment procedure. I can get the minuscule tone to vary when adjusting the trimmers. But you almost have...Radios1340 — 01:40 PM
A Marconi model 86
An imposing-looking radio, for sure.morzh — 12:43 PM
Philco model 60
Model 60 struck again :lol: Welcome to the Phorum! Above is the article on Model 60. Could be of some use. Now...morzh — 12:38 PM

[-]
Who's Online
There are currently 10918 online users. [Complete List]
» 3 Member(s) | 10915 Guest(s)
AvatarAvatarAvatar

>