Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Discussion About McMurdo Silver V vs. VI Radios
#3

I did some research on Bruce's Masterpiece VI, because one like it crossed eBay about 1.5 years ago.  In a complicated transaction, I ended up with the two chassis and a repro cabinet, plus Ron's modern speaker that he put together for his MPVI before he got his big Jensen.

Only 4 of them have been found, plus maybe a 5th that I'm still trying to track down.  Mine and Bruce's have serial numbers only 33 apart, at a time when I estimate Hallicrafters was turning out 100-125 radios a day across all models; these two radios were likely sitting side-by-side on the McMurdo assembly line!

The only ad that's been found for them ran in Radio News in November, 1938, *after* McMurdo Silver closed down.  They were advertised as "The new 1939 Masterpiece VI."  So not a VII prototype, but an actual production radio of which very few were produced.  I wrote up what I know about them here:  http://www.radiomuseum.org/r/mcmurdo_mas...vi_20.html

As far as prices go, the market for the speakers seems strong, but the prices on the receivers seems to be dropping a bit.  I doubt there would be much realized difference between a complete V, VI, or VI-20.  I think you'd have to be a recognized McMurdo Silver collector with broad experience with all their models, and really sing the praises of the VI-20, to make it seem more worthy than the VI and pull a higher price.

Oh, another thing to note:  When McMurdo Silver switched to the single choke amp, which was still during the production of the 1937/38 MPVI, they seem to have also switched to double-connector cables.  So the early MPVI receiver and amp have a cable hardwired to each chassis.  But later chassis have no hard-wired cables.  In the eBay auctions I've seen for these components, the cables are missing.  And it's likely the L1 choke would be sold with the speaker, not removed and sold with the amp, as it should be.  So that whole mish-mash of mixed and missing components should definitely be a detriment to prices for anyone bidding on pieces, if they know what they're buying.


Messages In This Thread
RE: Discussion About McMurdo Silver V vs. VI Radios - by palegreenthumb - 08-21-2015, 02:18 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 60
This is my thread on 60 from 2016. I had to rewind the osc coil, and I actually counted the turns and then rewound i...morzh — 03:34 PM
Philco model 60
Yes, Mark belongs to the same Michigan Antique Radio Club that I do. I suspect that the oscillator coil is in need of a ...Radios1340 — 03:10 PM
A Marconi model 86
Yeah. I am dreading the thought of what to do with all my consoles when I will no longer be able to move them around. I...morzh — 02:51 PM
1947 Silvertone 7086 Wire Recorder/Phono/Radio on YouTube
Cool gadget, Buzz. I took me a couple of second to undestand that that oscillating thing makes the wire to spool correc...morzh — 02:50 PM
A Marconi model 86
My back hurts already, you could build a house with all the wood. PaulPaul Philco322 — 02:49 PM
1947 Silvertone 7086 Wire Recorder/Phono/Radio on YouTube
Part 4 of this series now uploaded link below to anyone interested Buzz — 02:39 PM
Philco model 60
Welcome to the Phorum, Radios1340!  The oscillator coil on the 60 is a common culprit.  I just bought a 60B (June 1934) ...GarySP — 02:33 PM
Philco model 60
Yes, standard alignment procedure. I can get the minuscule tone to vary when adjusting the trimmers. But you almost have...Radios1340 — 01:40 PM
A Marconi model 86
An imposing-looking radio, for sure.morzh — 12:43 PM
Philco model 60
Model 60 struck again :lol: Welcome to the Phorum! Above is the article on Model 60. Could be of some use. Now...morzh — 12:38 PM

[-]
Who's Online
There are currently 9006 online users. [Complete List]
» 2 Member(s) | 9004 Guest(s)
AvatarAvatar

>