41-220 Electrical

Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

41-220 Electrical

exray
Phorum Expert

Posts: 893
Threads: 9
Joined: Mar 2008
City: Vieques, PR USA State, Province, Country: PR

03-01-2009, 04:34 PM

2MERCS Wrote:Also this unit uses a resistor that I will call a dual output strip. It has three points one is suppose to be I believe (The Schematic is a bit blurry) 53ohms the second is 137ohms. The second measures out great right at 135 but the first is only at 3.6. Can anyone give me an idea of what the wattage of this resistor is so I can get a replacement?

Thanks,
'Daniel

PS if it helps the Philco part number is 33-3375 (The 5 is blurry but I believe it is a 5)

Did you disconnect it from the circuit to take a measurement? If not, try unscrewing the dial lamp and try again. It would be unusual for it to read low. Its probably a wirewound resistor and it would take some sort of short to affect its value.

Sorry, can't help on the physical location of the ac cord connection.

-Bill

Website Find

« Next Oldest | Next Newest »

Thread Closed

Messages In This Thread

41-220 Electrical - by 2MERCS - 02-22-2009, 11:39 PM

Re: 41-220 Electrical - by 2MERCS - 02-23-2009, 04:56 PM

Re: 41-220 Electrical - by 2MERCS - 03-01-2009, 04:03 PM

Re: 41-220 Electrical - by exray - 03-01-2009, 04:34 PM

Re: 41-220 Electrical - by 2MERCS - 03-01-2009, 05:13 PM

Re: 41-220 Electrical - by 2MERCS - 03-03-2009, 04:57 PM

View a Printable Version

Users browsing this thread: 1 Guest(s)

Recent Posts
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM

Who's Online

There are currently 9727 online users. [Complete List]
» 2 Member(s) | 9725 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me