Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

48-475 signal injection
#5

Are you injecting your signal through a .1 uF cap? If not capacitively isolated, any DC on your Sig Gen lead could change the grid bias.

But don't ask me why the same thing doesn't happen at point "D". It's a mystery to me.

Everything I've found on line says that the 7C5 is an acceptable substitute for the 7B5 & the specs look similar enough.

John Honeycutt


Messages In This Thread
48-475 signal injection - by Patrick - 09-27-2015, 02:34 PM
RE: 48-475 signal injection - by Patrick - 09-29-2015, 02:47 PM
RE: 48-475 signal injection - by Radioroslyn - 09-29-2015, 06:11 PM
RE: 48-475 signal injection - by Patrick - 09-29-2015, 06:41 PM
RE: 48-475 signal injection - by Raleigh - 09-29-2015, 07:53 PM
RE: 48-475 signal injection - by Patrick - 09-29-2015, 08:54 PM
RE: 48-475 signal injection - by Raleigh - 10-02-2015, 10:27 PM
RE: 48-475 signal injection - by Patrick - 10-04-2015, 01:00 AM
RE: 48-475 signal injection - by Patrick - 10-09-2015, 02:44 PM
RE: 48-475 signal injection - by Patrick - 10-09-2015, 01:23 PM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
OK, so 18 and 19 as they should be. What is "everything else?" Try to be more specific in your descriptions:...morzh — 12:44 PM
6TPZ and 5TPO Radio Help
Yeah, I'm still on 5TPO. Sorry, my bad, points 1 and 2 should be points 18 and 19 (easy mistake  :think: )  X7 is shown ...R3Sons — 11:42 AM
Philco 40-120C Filament Wiring
Hi folks, I'm in the process of restoring a Philco 40-120C and I'm finding the wiring to be a bit puzzling. According to...bluecap — 11:28 AM
462ron
Hi Levi, here’s just a thought. Most radios run the oscillator higher than the dial setting. Say you set your radio to 1...462ron — 10:10 AM
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM

[-]
Who's Online
There are currently 7143 online users. [Complete List]
» 1 Member(s) | 7142 Guest(s)
Avatar

>