Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Model 89L, Code 123 project
#1

My first recollection of radio in my life accured when I was about 4 years of age. I can vividly recall standing in front of my parents Philco floor model radio and listening to the music that was being broadcast from WMEX Boston. My parents had this radio in their home until the end of the 1940's when we got our first TV. Many years later having retired and a lot of free time, I decided to locate the exact model radio and restore it to use for "old time sake." Over time I found several being offered on ebay, but they were located far away and I was reluctant to have such a radio shipped to me. Some were closer but the cabinets were a disaster. Fortunately I found one 10 miles from my home and the cabinet was in excellent condition. The only thing missing from the radio were the correct Philco rosette knobs (which I can get). The radio still has the original Philco tubes! When I was in the business of restoring antique auto radios I worked on numerous Philco auto radios from the 1930's and in doing so I used the Rider manuals and diagrams as my guide. They weren't always easy to use, but they served their purpose. I am quite familiar with the Philco radio characteristics and thus was looking foward to a memorable experience with my newly gotten Philco console. However that joyous anticipation quickly came to a halt once I immersed myself into my endeavor. The radio I am hoping to restore is a Philco Model 89L Code 123 from 1933, a year in which I have discovered Philco made a number of changes during their production runs. The chassis shares some general similarities with Philco auto radios of the 1930's, but not in all areas. Household radios it appears are more of a nightmare in some instances! I have also learned that some consider this model to be the Philco radio from H***! (I haven't gone but a little ways in my efforts and have learned why this radio has that reputation!) I have the Riders volumes on CD and searching thru them have been able to print some diagrams. Alas! All but one of the diagrams that I have been able to attain agree with the chassis configuration that I have, (I got that from the internet) and that diagram along with the pictoral layout drawings are of poor quality due to "fuzziness" and blurring of printed information or images. My hope is that there exists somewhere in Philco Land a source for schematics and layout data that can be more readily understood by two very aging eyes! Any suggestions (or hints) would be much appreciated. BTW, I'm sure that this model radio has been discussed before on this forum and if so I am reluctant to bring back and old chestnut, but I find this forum to be my best resource for info. Thanx, Hal (Ex W1DRW).


Messages In This Thread
Philco Model 89L, Code 123 project - by Halsol - 10-26-2015, 11:03 AM



Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
OK, so 18 and 19 as they should be. What is "everything else?" Try to be more specific in your descriptions:...morzh — 12:44 PM
6TPZ and 5TPO Radio Help
Yeah, I'm still on 5TPO. Sorry, my bad, points 1 and 2 should be points 18 and 19 (easy mistake  :think: )  X7 is shown ...R3Sons — 11:42 AM
Philco 40-120C Filament Wiring
Hi folks, I'm in the process of restoring a Philco 40-120C and I'm finding the wiring to be a bit puzzling. According to...bluecap — 11:28 AM
462ron
Hi Levi, here’s just a thought. Most radios run the oscillator higher than the dial setting. Say you set your radio to 1...462ron — 10:10 AM
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM

[-]
Who's Online
There are currently 5603 online users. [Complete List]
» 1 Member(s) | 5602 Guest(s)
Avatar

>