Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 511 transformer smell
#1

I have an old 511 I found at auction. I inspected the underside of the chassis and can see that the caps were all replaced. As I understand it, the radio sat for at least 10 years unused, however.

The radio powers on fine and tunes stations well. The sound is loud. Everything seems to work well. The unit looks to be drawing between 80 and 90 watts at 120v. Is that typical? In all of my research I've only found one mention of power draw and that person mentioned 50w.

After about 15 min. or so, the transformer starts putting out a slightly sweet smell. I looked at the bottom of the transformer and I don't see where anything has leaked out. I'm guessing the smell isn't normal and may be indicative of overheating due to current draw.

Can anyone tell me how many amps these things are supposed to draw?

Thanks, Mark.


Messages In This Thread
Philco 511 transformer smell - by mgandalf - 11-24-2015, 10:17 AM
RE: Philco 511 transformer smell - by klondike98 - 11-24-2015, 11:59 AM
RE: Philco 511 transformer smell - by Steve Davis - 11-24-2015, 12:43 PM
RE: Philco 511 transformer smell - by mgandalf - 11-24-2015, 05:01 PM
RE: Philco 511 transformer smell - by mgandalf - 11-24-2015, 05:15 PM
RE: Philco 511 transformer smell - by Arran - 11-25-2015, 12:08 AM
RE: Philco 511 transformer smell - by Steve Davis - 11-25-2015, 12:38 AM
RE: Philco 511 transformer smell - by Phlogiston - 11-25-2015, 12:26 PM
RE: Philco 511 transformer smell - by codefox1 - 11-26-2015, 01:40 PM
RE: Philco 511 transformer smell - by mgandalf - 11-30-2015, 02:14 PM
RE: Philco 511 transformer smell - by codefox1 - 12-01-2015, 05:22 PM



Users browsing this thread: 4 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
OK, so 18 and 19 as they should be. What is "everything else?" Try to be more specific in your descriptions:...morzh — 12:44 PM
6TPZ and 5TPO Radio Help
Yeah, I'm still on 5TPO. Sorry, my bad, points 1 and 2 should be points 18 and 19 (easy mistake  :think: )  X7 is shown ...R3Sons — 11:42 AM
Philco 40-120C Filament Wiring
Hi folks, I'm in the process of restoring a Philco 40-120C and I'm finding the wiring to be a bit puzzling. According to...bluecap — 11:28 AM
462ron
Hi Levi, here’s just a thought. Most radios run the oscillator higher than the dial setting. Say you set your radio to 1...462ron — 10:10 AM
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM

[-]
Who's Online
There are currently 5437 online users. [Complete List]
» 1 Member(s) | 5436 Guest(s)
Avatar

>