Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

philco transitone tropic model 3010-123 schematic
#1

hi every body
first...thanks for allowing me to register in the philco phorum.
i just bought a philco transitone tropic model 3010-123... and being more than 70 years old radio there
is some rust and a lot of dirt.
i looked for a schematic for it but unfortunately i could not find one.
the thing is because of the 70 years old dirt i can not read some of the resistors values and almost all the paper caps. apart from the electrolytic one which original philco.
i would be very grateful if any body can help me with that and since no schematic is available i was thinking
that may be somebody have a better shaped radio and provide me with photos of the radio that might help me to know the values of the caps. and the resistors.
there is something else....i checked radiomuseum.org. and the tubes on that web site seems to be different from what i found in the radio...in my radio the tubes are 12be6,6bj6,35w4,50c1 nad the fifth is not clear
whether its 12av6 or ????? the only visible writing is 12a...
forgive my ignorance but i'm just a hobbyist...thanks again
N.B
a photo of the radio is attached which i found on radiomuseum.org

much obliged
Aras


Attached Files Image(s)
   
#2

Hello, welcome and Merry Christmas!

The 3010 is a 1950 model.

I have both brown bakelite versions of the 3010 (each version has different dial glass). These were also sold with painted ivory cabinets. Same cabinet as the USA model 51-532. In fact I had to buy a 51-532 in order to get a good cabinet for one of my 3010s, as its original cabinet was destroyed in shipping due to poor packing. But I digress...none of this helps you, sorry...

You might ask Chuck about the schematic, although he has stated that his stock of post-1947 Philco schematics is rather hit and miss.

--
Ron Ramirez
Ferdinand IN
#3

thanks
#4

Welcome to the Phorum!
Icon_wave
#5

thanks a lot..
#6

Icon_biggrin ..thank you for your time..... i guess i have to improvise.....hopefully this will not lead to a disaster
#7

Hi Aras, I'm not sure if it is going to be a match for your radio, but I did find the schematic and information for the 51-532 in my Bateman's schematics. I am attaching it as a JPG file for you.
[Image: http://40.media.tumblr.com/4289ef751ec9a...1_1280.jpg]
#8

Your 3010 does include a 12AV6.

If you can give me a little time, I can scan and send you the 3010-123 service info...may be a day or two before I can, though...

--
Ron Ramirez
Ferdinand IN
#9

i don't know how to thank you guys.......i'm really grateful for your help.....
the 3010-123 uses 12be6,6bj6,45w4,50c5 and as Ron pointed out 12av6....the schematic of the model 51-530,532 and 534
are a bit different i guess......
non the less i really appreciate any  help from you guys
thanks again and God bless you..
#10

Here you are, grundigman3000:

http://www.philcoradio.com/images/Tropic_3010-123.pdf (High resolution, 4 pages, 24.8 MB)

Please let me know when you have this so that I may remove it from the server.

--
Ron Ramirez
Ferdinand IN
#11

Hi Ron
thanks for your time...but unfortunately the file can not be opened(i don't know why)
sorry to annoy you
#12

It opens fine for me.

You do need a PDF reader to view the file. The most popular solution is here, free:

http://get.adobe.com/reader/

Windows 8.x and 10 have built-in PDF readers, as does the Firefox browser.

Let me know if this doesn't work for you and I'll try something different...

--
Ron Ramirez
Ferdinand IN
#13

grundigman3000

Try this - individual files of each page.

http://www.philcoradio.com/images/3010_pg1.jpg
http://www.philcoradio.com/images/3010_pg2.jpg
http://www.philcoradio.com/images/3010_pg3.jpg
http://www.philcoradio.com/images/3010_pg4.jpg

Not as high in resolution as the PDF but should work for you.

--
Ron Ramirez
Ferdinand IN
#14

I got it......thank you so much.......
 much obliged
 Aras
#15

Hi again
i'm sorry but i promise this will be my last question
its mentioned in the part list that R4 is a special surge resistor and its missing in my radio
what would be the value of such resistor??

thanks again




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
OK, so 18 and 19 as they should be. What is "everything else?" Try to be more specific in your descriptions:...morzh — 12:44 PM
6TPZ and 5TPO Radio Help
Yeah, I'm still on 5TPO. Sorry, my bad, points 1 and 2 should be points 18 and 19 (easy mistake  :think: )  X7 is shown ...R3Sons — 11:42 AM
Philco 40-120C Filament Wiring
Hi folks, I'm in the process of restoring a Philco 40-120C and I'm finding the wiring to be a bit puzzling. According to...bluecap — 11:28 AM
462ron
Hi Levi, here’s just a thought. Most radios run the oscillator higher than the dial setting. Say you set your radio to 1...462ron — 10:10 AM
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM

[-]
Who's Online
There are currently no members online.

>