Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

A Big Thanks To All Involved
#1

Johnny has been debugging this radio for many, many hours and days and even weeks now. One of you stepped in (Raleigh) and said check continuity on pin 7 of the 1st IF 7B7 tube. That pin was floating, not connected to anything. Set sings like a bird now.

So a big thanks to all of you who helped me get through this thing. The Philco 41-285. This is my nephews first radio and I kinda let him run with the ball on it. But it's my fault because I rang this circuitry out many times and didn't catch that ungrounded pin 7.

Thanks again for all the help,

Johnny

P.S. Why don't we have one of these "emoticons" that has egg all over its face? I sure would put it next to my name today.
#2

We could all use one of those "egg on face" emoticons for some nagging little problem we never thought to check for!

John Honeycutt
#3

Sometimes it just needs a second pair of eyes to look at the problem. That's what we all find here. I am amazed at the things I have missed that another kind contributor spots instantly, and replies to my questions (when they should be working.) The knowledgebase is really impressive. I always contribute when I feel I can.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM
RCA 15X
Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM
Philco 91 Schematic
Hi Dan, I can't explain this specific resistor but I have seen the use of a switch to apply B+ voltage to screen gri...RodB — 09:36 PM

[-]
Who's Online
There are currently 11279 online users. [Complete List]
» 2 Member(s) | 11277 Guest(s)
AvatarAvatar

>