Posts: 1
Threads: 1
Joined: May 2016
City: ATHENS OH
I have recently acquired a Philco Lowboy 45. The cabinet is in good shape, but the only thing left inside is the speaker. I tested it, it's not blown but is just really quiet. I'd just like to know more about the parameters of the speaker (power handling, impedance, etc). If anyone has anything, that'd be great. Thanks.
Posts: 5,128
Threads: 271
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Welcome to the Phorum!
Ron has collected and posted (see the speakers.zip file) speaker information, unfortunately unless I missed it I only see the 5" speaker for the 45C model, not your 45L. Perhaps someone will have the info.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
It is most likely that your speaker is "quiet" because the field coil is not being charged. The old speakers did not use a permanent magnet. So without the radio to supply power it has no magnet.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 5,128
Threads: 271
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Posts: 16,241
Threads: 564
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Before we go on a wild goose chase why don't you tell us HOW exactly you tested it.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
The 45L speaker is K-22, which is in the speaker index - only the 45L is not listed as using it.
Good catch, Bob. I'll have to correct that after K-town.
--
Ron Ramirez
Ferdinand IN
Posts: 670
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
May NOT be the speaker,,could be capacitors,,resistors,,,if have not be replaced,,check tubes,,etc,,
Posts: 16,241
Threads: 564
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Ken
He kinda said there is only speaker in there. Implies no chassis, inferring no capacitors, resistors or tubes. Unless I am missing something
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 670
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
Apparently,,,I missed that ALSO-------SORRY
Users browsing this thread: 3 Guest(s)
|
Recent Posts
|
New member
|
Good picture,
When was it taken? You don't look in it like a guy who has a teenage son :)morzh — 06:13 PM |
New member
|
Love the pic! I'm southern IL, so wouldn't be much help and Bob Anderson is very good on those, but lives in Chicago are...TV MAN — 05:25 PM |
Philco 40-120C Filament Wiring
|
:thumbup:klondike98 — 04:56 PM |
Philco 40-120C Filament Wiring
|
With these values I think you are OK; the Cmax for this tube is 40uF.
Your Vbb could rise a bit, but probably not too mu...morzh — 04:53 PM |
Philco 40-120C Filament Wiring
|
BTW, someone had replaced the original 20uF/20uF filter cap with a 47uF/33uF cap. Do you think these values are safe on ...bluecap — 04:33 PM |
Philco 40-120C Filament Wiring
|
You're correct. I was misinterpreting the key position. I now know where it is, and things are making sense. I appreciat...bluecap — 04:29 PM |
Philco 40-120C Filament Wiring
|
I think Morzh has a good thought. Check the key position. The under chassis diagram in the Philco info shows an “H” for ...klondike98 — 04:25 PM |
Philco 630csx power cord
|
Yes, the third wire goes to the stud on the side and is separate from the other two.
I've usually used cloth covered ...Tynwald — 03:09 PM |
New member
|
Have you tried Alabama Historical Radio Society?
They possibly could recommend someone.
I remember a name of Dee Hanes...morzh — 03:08 PM |
Philco 46-480 Electronic Restoration
|
Nope, he can’t tell me the dimensions. Looks like I won’t be buying it.jrblasde — 02:38 PM |
Who's Online
|
There are currently 4414 online users. [Complete List] » 1 Member(s) | 4413 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|