Posts: 1,192
Threads: 83
Joined: Jan 2014
City: Annapolis, IL
State, Province, Country: USA
Mike, I bought it that way. I originally bought it so I could repair it using parts from mine that got "moused", but I don't have the heart to knock any of those in the head, esp one that I know worked, so I am looking for a tranny for this one. It is a 500c. I may put an ad in the wanted section one of these days.
If I could find the place called "Somewhere", I could find "Anything" 
Tim
Jesus cried out and said, "Whoever believes in me , believes not in me but in him who sent me" John 12:44
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
You know, seeing this thread is making me start to think about setting aside all of that solid-state stuff for awhile and maybe get started on something I've put off for too long...restoring my Fisher TA-600 receiver. Tubes and lots and lots of caps.
--
Ron Ramirez
Ferdinand IN
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Go for it Ron. Bet it will be a great thread. 
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
come on this is a PHILCO phorum
put that modern junk away
restore some thing nice and relaxing with warm bright glowing tubes
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
uh, Sam...
Fisher 800, 500, 400, and TA-600 receivers do use warm, bright, glowing tubes...
--
Ron Ramirez
Ferdinand IN
Posts: 1,192
Threads: 83
Joined: Jan 2014
City: Annapolis, IL
State, Province, Country: USA
Aaahh, Sam, Sam, Sam ...  haven't your ever seen a nice, healthy quad of 7591a's glowing in a sweet sounding Fisher 500 or so series?  I used to have a little mirror behind my 500c.   There is something about the "hi-fi" era of the late 1950's through the mid 1960's. Beware tho, it can be addictive! Just ask Ron,  !
If I could find the place called "Somewhere", I could find "Anything"
Tim
Jesus cried out and said, "Whoever believes in me , believes not in me but in him who sent me" John 12:44
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Well finally got the parts and time to revisit the rectifier in the 800B.
Here is the old one.
[Image: http://i1336.photobucket.com/albums/o654...uck1gt.jpg] [Image: http://i1336.photobucket.com/albums/o654...jxdkgu.jpg]
And the new one that will be going in.
[Image: http://i1336.photobucket.com/albums/o654...xexsyw.jpg]
I hooked it up with jumper wire to see how it would perform and it looks like it will do the job.
[Image: http://i1336.photobucket.com/albums/o654...mxxm3b.jpg]
-22.23v calls for -22.25v
[Image: http://i1336.photobucket.com/albums/o654...53naiv.jpg]
Now to figure out a neat installation.
Thanks Mondial you probably saved my tubes and transformers from destruction. 
Posts: 1,114
Threads: 14
Joined: Feb 2013
City: Irvington, NY
Looks good. Check your AC line current draw with the new rectifier. I'll bet its a lot lower now due to the decreased output plate current
Yes, the bias on the output tubes is very important. With low bias the tubes overheat, liberating gas inside the tube. This causes the plate current to increase further resulting in a runaway condition. The final result is a meltdown of the power supply and/or the output transformers.
The line fuse should provide some protection, but make sure it is the correct current value (or lower!). Sometimes people replace the fuse with a higher amp rating which is a recipe for disaster.
You probably should replace the green molded line bypass cap with a safety rated type. There is another identical cap across the power transformer secondary.
(This post was last modified: 02-19-2017, 09:29 AM by Mondial.)
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Just checked the fuse that was in it. A 10 amp! 
Should I use safety caps on both of the .01uF - C-103 & C-106? Thanks.
Posts: 1,114
Threads: 14
Joined: Feb 2013
City: Irvington, NY
Yes the safety rated Y cap should be fine in both locations. Its not really needed across the transformer for safety but they are usually rated for 240VAC so its a good choice.
I would go with a 2.5A slo blo fuse, or maybe even a 2A if your measured draw is less than that. Its better that the fuse blows before anything else expensive. In any case the fuse is easy to replace and if you find it blows under normal operating conditions you can up the rating slightly.
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
I forgot to mention the amperage draw. It was little over 2 amps and dropped down to 1.5amps.
with the new rectifier.
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Just a quick update on progress of the receiver.
Got the rectifier installed. This pic. is in the trial stage. I wanted to locate it away from the 15 ohm 5 watt resistor so I used a terminal strip.
[Image: http://i1336.photobucket.com/albums/o654...virhco.jpg] Also installed a line safety cap and a inrush current limiter.
[Image: http://i1336.photobucket.com/albums/o654...0tpetj.jpg]
Changed out the coupling capacitors and added the 4-10 ohm 1/4 watt resistors to the output tubes.
[Image: http://i1336.photobucket.com/albums/o654...xmfhe7.jpg] So far so good. I did run into a problem on one of the 12at7 tubes in the MPX section.
tube V100 called for 95v on the plate and 7v on cathode. On 1/2 of tube. I was getting .855v on cathode and 129v on the plate.
I changed the tube and still not correct but better. Now getting 5v on cathode and 112v on plate.
Checked the resistors in that part of circuit and they are all very close or spot on.
The second half of tube the voltages are correct.
It's playing very well on the bench but does have some scratching while tuning .
I'll be addressing that tomorrow with a good cleaning of the tuner.
If anyone has ideas about the V100, tube voltage please let me know.
Posts: 1,114
Threads: 14
Joined: Feb 2013
City: Irvington, NY
Don't be concerned about the exact voltages on the first half of V100. They are very much affected by the individual characteristics of the 12AT7 installed.
If you have 5V on the cathode and 112V on the plate that is in the range of normal operation. You can try another 12AT7 and see if the voltages get closer to those on the schematic.
Posts: 1,192
Threads: 83
Joined: Jan 2014
City: Annapolis, IL
State, Province, Country: USA
I am curious as to how it sounds in 'stereo'. I always had to run my 'old' 500c in mono because the stereo had an echo or ringing sound. Probably alignment, but I didn't have anything to set it up with at that time or any help doing it. If I can find a power transformer I am going to start a resto on my 'replacement' 500c. I am following your thread with a lot of interest. Keep posting 
If I could find the place called "Somewhere", I could find "Anything"
Tim
Jesus cried out and said, "Whoever believes in me , believes not in me but in him who sent me" John 12:44
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
I won't worry about the tube voltage on V100 Thanks Mondial.
Tim I don't have any ringing on stereo setting. It does sound little better and louder when set to stereo.
I don't think I will have to align this one.
I did find something that I don't know if its a problem or not.
While checking the channel separation of the left and right speaker. Its quiet on either speaker when balance is turned all the way left or right. But with the loud switch on I can hear audio in both speakers when balance pot is turned full right or left. I would say maybe 20% sound out of the side that should be off.
Hope I'm being clear on this.
All pots and switches have been cleaned with deoxit and lubed.
Users browsing this thread: 6 Guest(s)
|
|
Recent Posts
|
|
B&K 1077B no video
|
| Hello Tim,
I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ?
Sincerely Richardradiorich — 01:55 AM |
|
B&K 1077B no video
|
| I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM |
|
RCA 15X
|
| I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM |
|
B&K 1077B no video
|
| Hello Tim,
I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!.
Sincerely...radiorich — 11:07 PM |
|
RCA 15X
|
| Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM |
|
Philco 91 Schematic
|
| Hi Dan,
I can't explain this specific resistor but I have seen the use of a switch to apply B+ voltage to screen gri...RodB — 09:36 PM |
|
6TPZ and 5TPO Radio Help
|
| I suspect it's been repaired before.
And I suspect whoever repaired it, wanted to re-use old transistors' pin stubs in o...morzh — 09:24 PM |
|
B&K 1077B no video
|
| Thanks Rich! I'll take a look and see what he has. I know there's more modern equipment to be had, but this one I know a...TV MAN — 09:11 PM |
|
B&K 1077B no video
|
| Hello Tim,
Here is a link to restoration of one on Phil's old radios site !
Sincerely Richard
bk1077bradiorich — 09:01 PM |
|
6TPZ and 5TPO Radio Help
|
| I'm a little befuddled on this one. Should X5 and X4 be tied together like this? It looks like someone added this at so...R3Sons — 07:33 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
