Posts: 751
Threads: 91
Joined: Nov 2015
City: Jonesboro
State, Province, Country: AR
Fellow Philco Phans 
I'd appreciate some help.
I just picked up this 1936 620F, and it has been worked on. Most noticeably, the grill cloth  . I plan to replace it, but the backing is a flimsy cardboard. 
Would anyone happen to have this or a similar model that would be so kind as to get a tracing or a good quality pic of the original grill board for me 
[Image: https://farm5.staticflickr.com/4207/3554...6d9c_k.jpg]
[Image: https://farm5.staticflickr.com/4257/3484...4c3a_k.jpg]
Thanks in advance!
Blessings,
Jeff W.
Jonesboro, Arkansas
http://jeffsradios.weebly.com
God loves you as you are, not as you should be, because none of us are as we should be. - Brennan Manning
Posts: 1,532
Threads: 242
Joined: Sep 2012
City: West Bend, Wisconsin
Not sure if this will help at all, as it's a model 625, which may or may not have the same backing board, but this reassembly video shows how it looks beginning at around the 6:40 mark:
https://www.youtube.com/watch?v=tCkg_QaDCno
Greg V.
West Bend, WI
Member WARCI.org
Posts: 751
Threads: 91
Joined: Nov 2015
City: Jonesboro
State, Province, Country: AR
This will do! Thank you very much! 
Blessings,
Jeff W.
Jonesboro, Arkansas
http://jeffsradios.weebly.com
God loves you as you are, not as you should be, because none of us are as we should be. - Brennan Manning
Posts: 751
Threads: 91
Joined: Nov 2015
City: Jonesboro
State, Province, Country: AR
One more Question: I'm in the process of recapping, and need to know the values of the tone control. Part No. 30-4316.
Blessings,
Jeff W.
Jonesboro, Arkansas
http://jeffsradios.weebly.com
God loves you as you are, not as you should be, because none of us are as we should be. - Brennan Manning
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Looks like 0.02 or could be 0.01 kind of hard to tell. and 3 or 5000 uuf. 61 & 61a on schematic.
http://www.nostalgiaair.org/pagesbymodel...013804.pdf
(This post was last modified: 07-03-2017, 09:54 PM by KCMike.)
Posts: 1,886
Threads: 214
Joined: May 2015
City: Seattle
State, Province, Country: WA
It's a bit clearer on this scan of service bulletin 218A:
https://drive.google.com/file/d/0B64cfWa...sp=sharing
0.02uF in the tone control for 61.
0.003uF tubular for 61a.
BTW - nice radio Jeff!
Posts: 751
Threads: 91
Joined: Nov 2015
City: Jonesboro
State, Province, Country: AR
Thanks Nathan!
Hopefully this 620 will go smoother than my 1st!
Took me 13 months to get my 1st up and running. 
So far it's going well.
Blessings,
Jeff W.
Jonesboro, Arkansas
http://jeffsradios.weebly.com
God loves you as you are, not as you should be, because none of us are as we should be. - Brennan Manning
Posts: 751
Threads: 91
Joined: Nov 2015
City: Jonesboro
State, Province, Country: AR
I made this video a couple nights ago. It's up and running.  I have a reproduction dial on order from Radio Daze, and a grill cloth from Richmond Designs . I'll wait until I get the dial in before doing the alignment, as the one on there now is incorrect. 
[Video: https://youtu.be/vzbKkz7eZyc]
Blessings,
Jeff W.
Jonesboro, Arkansas
http://jeffsradios.weebly.com
God loves you as you are, not as you should be, because none of us are as we should be. - Brennan Manning
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
Philco 46-480 Electronic Restoration
|
| Late last night a guy reached out in response to my posting on the Antique Radio Forum and suggested I contact Trust Aut...jrblasde — 11:01 AM |
|
Philco 630csx power cord
|
| Have you opened up that plug? It may be that the third wire is connected to that brass stud on the side of the plug and ...Arran — 02:57 AM |
|
Model 27-84 BUZZ?Humm?
|
| I would have to look at the schematic but it's not uncommon in 1930s AC radios to have the negative of one filter cap co...Arran — 02:46 AM |
|
Model 27-84 BUZZ?Humm?
|
| Hello Bruce,
First all do mean a 37-84b ?
Did you take any before and after pictures ?
is it a buzz like when you touch...radiorich — 01:59 AM |
|
B&K 1077B no video - problem solved
|
| Hello Tim,
Yes, I even check all of my replacement parts when I install them and I too had a capacitor go bad not long a...radiorich — 01:54 AM |
|
B&K 1077B no video
|
| I got back into it tonight. Problem found and resolved! Sometimes it helps to take a break and think things over. It was...TV MAN — 12:40 AM |
|
6TPZ and 5TPO Radio Help
|
| Thank you. I have to take a break from it for about a week. I'll have to do some thinking. I was toying with the idea ...R3Sons — 12:21 AM |
|
Model 27-84 BUZZ?Humm?
|
| Drowning in a overloud buzz/Humm. Have already changed filter caps,bakelite blocks( caps),out of speck resistors,checked...Bruce — 12:17 AM |
|
Philco 630csx power cord
|
| Hello Mike
Here is the Link to the company the place is called Grand Brass lamp parts .
I buy all my Lamp parts plus ...radiorich — 12:00 AM |
|
Philco 40-120C Filament Wiring
|
| Is the tube in your radio actually 35Z3 or 35Y4, or something else?morzh — 10:55 PM |
|
Who's Online
|
There are currently 2626 online users. [Complete List]
» 2 Member(s) | 2624 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
