Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Refinishing a Philco 38-7 floor model cabinet
#1

I am in the process of restoring a Model 38-7 cabinet which is quite sun-bleached in most places. Because of the sun bleaching and portions of the cabinet where the finish is cracked and worn, I feel sure that I will have to refinish the cabinet.

Does anyone know how the cabinet was originally finished? Was it a toned lacquer? If so, what color was used, and was there only one color originally on the cabinet or several? The radio does apparently have a wood inlay across the face which does appear to be a lighter color than the rest of the cabinet. However, the difference in color may be because of the difference in the underlying type of wood.

Thanks in advance,
John King
#2

Hi John

The original finish was tinted lacquer, with a coat of clear lacquer added after the tinted lacquer.

All of the 38-7XX cabinets I have seen were all one color: Medium Walnut. Either that or Perfect Brown (both Mohawk colors) is what you will want to use.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Welcome to the Phorum, R3Sons! I have very limited experience with car radios other than installing custom radios back ...GarySP — 01:08 PM
462ron
OK, I need to rename this thread to say..Eico 368 TV/FM Sweep Generator instead of the current title..Heathkit Sweep Gen...462ron — 12:49 PM
6TPZ and 5TPO Radio Help
Hello, I have a Philco (Ford) 6TPZ and a 5TPO radio.  I replaced the electrolytic capacitors in both.  I have the SAMS m...R3Sons — 12:29 PM
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM
Var resistor id
Considering what it is in series with, I doubt there should be any power requirements. Of course, we should know wher...morzh — 03:23 PM
Var resistor id
Trim pot, about 1/2 watt part of focus divider. As stated 2k ohms. This appears to be a rusty chassis, resolder all ...Chas — 03:19 PM

[-]
Who's Online
There are currently 7714 online users. [Complete List]
» 2 Member(s) | 7712 Guest(s)
AvatarAvatar

>