Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Peck & Hills Furniture Company
#16

(11-23-2017, 12:21 PM)lasurveyor Wrote:  ........I'm going to guess that Peck & Hills Furniture in Chicago bought their radio chassis from Jesse French......

Alan, Jesse French did not make their radio chassis's, they were a piano company who decided to dabble in radios for a couple of years.  Their most popular set, the model G or Junior had a Loftin White chassis made by Sterling in Cleveland, Oh.  

So while you're most likely correct that Peck & Hills Furniture bought the chassis from someone else, it would not have been Jesse French.  I don't recognize the chassis in your radio, but if you look/ask around long enough you might spot who actually made the chassis.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#17

Looks kind of like a Day-Fan. I know that there was one of those chassis on the pile, I'll see if it is still there.

45 tube testing:

http://philcoradio.com/phorum/showthread.php?tid=16855

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#18

Thank you!! I don't think that there is any doubt that I have a Day-Fan. The chassis is identical is most ways. 

Now I seem to have a Model 5096 Day-Fan chassis, possibly a General Motors Corp. since they bought Day-Fan in 1929.

I haven't been able to find a 5096 schematic, but hopefully I can work off of a similar one. Anyone able to find a 5096?

Pretty interesting doing the reading and seeing the piano industry fretting over radio.

Thanks again, looks like Peck & Hills Furniture and Jesse French Piano both used some Day-Fan chassis'

Alan
#19

Alan, sure, no problem.

I did spot that chassis. It has been outside getting washed, but that won't hurt most of it. If you need any parts let me know, soon, as it is on it's way to be recycled. Or if you want to drive up - - it weighs a ton and the potted parts weigh half a ton.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#20

Would you ever think of making a new set of "legs", or know a woodwoorker?

Paul

Tubetalk1




Users browsing this thread: 6 Guest(s)
[-]
Recent Posts
New member
Hello all.  New member here. I bought a Predicta TV for my teenage son (who is into all things vintage, see attached pic...Jsmith5690 — 12:47 PM
Philco 46-480 Electronic Restoration
I’ve asked if they accept PayPal as payment so that I can contest it if the part doesn’t arrive.jrblasde — 12:46 PM
Philco 46-480 Electronic Restoration
Make sure th eperson who answered is not a scammer (lots of these there now) and the Trus A S, whoever they are and wher...morzh — 12:38 PM
Philco 40-120C Filament Wiring
I would disregard everything that is there now. I do not know who and when changed it. 1. Make sure that what you thi...morzh — 12:36 PM
Model 27-84 BUZZ?Humm?
Depends on the type of hum. SOme is made by outside devices. Try installing an X-cap (0.2-0.5uF) across the AC line, ...morzh — 12:23 PM
Philco 40-120C Filament Wiring
Thank you for your replies. That is the correct schematic and pin out diagram for the rectifier. The resistance acro...bluecap — 11:01 AM
Philco 46-480 Electronic Restoration
Late last night a guy reached out in response to my posting on the Antique Radio Forum and suggested I contact Trust Aut...jrblasde — 11:01 AM
Philco 630csx power cord
Have you opened up that plug? It may be that the third wire is connected to that brass stud on the side of the plug and ...Arran — 02:57 AM
Model 27-84 BUZZ?Humm?
I would have to look at the schematic but it's not uncommon in 1930s AC radios to have the negative of one filter cap co...Arran — 02:46 AM
Model 27-84 BUZZ?Humm?
Hello Bruce, First all do mean a 37-84b ? Did you take any before and after pictures ? is it a buzz like when you touch...radiorich — 01:59 AM

[-]
Who's Online
There are currently 2773 online users. [Complete List]
» 4 Member(s) | 2769 Guest(s)
AvatarAvatarAvatarAvatar

>