Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Need Help!!!
#1

Hi new here. I have inhareted a beautiful Philco consol/radio from a family member and I’m having some problems with it. First when I power it on I can here a hum but the turntable will not move or play and the radio will not play. What could i be missing? Also I can’t seam to figure out what’s model I have. The sticker on the back states that it is a 6185655 model but I can’t find anything on the web with that number. Any help would be great thank you.
#2

Welcome!

That sticker doesn't sound like a model number. Have a look at this guide to Philco identification and see if there's any other info you can provide:

http://philcoradio.com/phorum/showthread.php?tid=14943

Pictures would also be a big help for any of the helpful Phorum experts to id.
#3

Thanks for the reply. This is what’s on the back of the cabinet. 
[img]webkit-fake-url://b88a15de-4576-40ce-a4fc-7f116f87c624/imagejpeg[/img]
#4

It looks like your picture didn't attach correctly.

Have a look here for info on how to add images to your posts:
http://philcoradio.com/phorum/showthread.php?tid=29
#5

Let’s try this.


Attached Files Image(s)
   
#6

It'd be probably better if you have just shown the radio itself.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#7

It is most likely a mid 60's console combo.
It will need to be overhauled for proper function. The record player is gunked with old grease and the Spinning wheel (Idler) is probably rock hard and needs new rubber.

Kirk Icon_smile

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#8

I’ll snap a pic of the whole thing when I get back home.

I figured the whole thing needed to be gone through to reall get up and running again. Any feelings as to why the radio would not be working?
#9

Would this happen to be a pic of your set??


Attached Files Image(s)
   

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry




Users browsing this thread: 4 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM

[-]
Who's Online
There are currently 9972 online users. [Complete List]
» 1 Member(s) | 9971 Guest(s)
Avatar

>