Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Eveready made by Bosch?
#1

I notice a American Bosch Model 28 on Ebay and it looks identical to an Eveready Model 1 that I have. Do you think that Bosch made the Evereadys?
Curious, thanks if anyone has any insight.
Alan
#2

I'm not sure about the model 28, but American Bosch did make radios for Sonora and National Carbon Co. (Eveready):

https://books.google.com/books?id=uDk_5S...os&f=false

By-the-way, all three volumes of the Alan Douglas series Radio Manufacturers of the 1920's, is a great addition to any collector interested in early radio.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#3

Thanks so much for the info. It's clear that my Eveready was manufactured by Bosch. Interesting too, the Essex Radio Corp., I just picked up a '35.
Alan
#4

I had an Eveready that had the same exact internals as the American Bosch 28. My rather rare American Bosch 29AC console uses part of the model 28 in it as well.

No matter where you go, there you are.
#5

American Bosch used to do a lot of contract work like that, much like Wells Gardner and Belmont did, they were even making sets for U.S Westinghouse for a few years, whom unlike Canadian Westinghouse did not make their own sets during the 1930s. Some Northern Electric radios also appear to have used a Bosch chassis, I don't know if Bosch made these or if N.E made them under license in Montreal.
Regards
Arran




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM

[-]
Who's Online
There are currently 3080 online users. [Complete List]
» 1 Member(s) | 3079 Guest(s)
Avatar

>