Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco/Ford Stereo
#1

Just looking for information on this Philco Ford Stereo.  I believe it is from circa 1960.  Model H352UDK.  Radio works fine but there is no sound out of the speakers when playing the record player but you can hear the music so the needle works.  Not sure if there is any value in these stereo's.      Thank You!


Attached Files Image(s)
               
#2

Welcome to the Phorum!
Icon_wave
#3

Welcome to the Phabulous Philco Phorum !

That BSR changer is waaay-newer than 1960.  My best guess is about 1974.
Take a peek under the platter and make sure both the audio plugs are plugged in  the jack that's mounted there..... you're actually looking at the BACK of the jack, but you can see if the center pins of the RCA plugs show.  If not, take the back off and see why not. If they do show, then a dead cartridge, which is par for the course :

https://www.thevoiceofmusic.com/tetrad_help.html
#4

Thanks for your help.   Just wondering what I might ask for it in a estate sale.
#5

Those big consoles are sometimes hard to sell unless you happen upon the person that really wants one. If its an estate sale and you are primarily trying to get rid of it then I'd put $50 on it and take less just to move it out.
#6

"Thanks for your help.   Just wondering what I might ask for it in a estate sale."

Icon_thumbup

Stereo consoles have their fans ! ....and groups on FaceBook devoted to their restoration.  I belong to this one :

https://www.facebook.com/groups/498063417008273/

While I think that model is , generally, in the "lower echelons" of collectability, someone there may be interested in it.  Check it out. Icon_idea
#7

The service information places that model late 1971 to 1972 manufacture date.
Sadly, yes to the above comments, console stereos, except for the ones sought after by the 'Mad Men' crowd, or the California yuppies, just don't get the dollars one might wish.
Dan
#8

Thanks all for your help!




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM
Var resistor id
Considering what it is in series with, I doubt there should be any power requirements. Of course, we should know wher...morzh — 03:23 PM
Var resistor id
Trim pot, about 1/2 watt part of focus divider. As stated 2k ohms. This appears to be a rusty chassis, resolder all ...Chas — 03:19 PM
Var resistor id
Its a Sylvania 400 oscilloscope. here is a clip of r-100. Would be nice to know the current required. Not listed in part...Martinj — 02:10 PM
The list of my radio & TV collection!
Thanks Richard. I hope you enjoy it. Here I have created an English section on the history of radio with videos in Engl...RadioSvit — 10:23 AM
The list of my radio & TV collection!
Hello RadioSvit, first all happy new year ! I will watch your new videos this week. Sincerely Richardradiorich — 09:19 AM

[-]
Who's Online
There are currently 6203 online users. [Complete List]
» 1 Member(s) | 6202 Guest(s)
Avatar

>