Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Is the RCA 9k radio console a rarity and how many have been made?
#1

Hi to all. Please help with the information ... Recently I accidentally and in rather bad condition bought the RCA 9k radio console and I am very interested in information about the number of copies of this model and whether it is currently a rarity among collectors? Thanks for any information.
#2

I restored a 9K2 for a customer/friend about 10 years ago. That was a fine radio. It had a really nice cabinet - when refinished. AS-is, the beautiful veneers may not be very visible. If I had an extra 2 ft. of display space, I could squeeze one in (they are about 3ft. wide - I could just push extra hard).

As I recall the short-wave band went up to about 60mhz., but like many radios of the time, the osc. was only good to about 30mhz. It had a "Magic Brain" front end.

The 9K (no2) might be a little different.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#3

Thank you very much, Mr. Phlogiston, for your interesting information. Unfortunately, I got the first modification of 9k with a limited to 23 MHz band, low-power amplifier on 6F6 and a speaker system without resonators. But still, I am very happy with this purchase because the company RCA has greatly influenced the development of radio engineering in the USSR, and the desktop modification of this radio console was made almost unchanged in the USSR under the index 9H4. So it will be very interesting for me to compare these two models. Thank you again . Icon_thumbup
#4

I finally got my purchase and did an audit. The condition of the device turned out to be better than I thought.
Externally severely damaged, there are deep scratches, no 5 legs out of 6, but no fragments of veneer and therefore the restoration should not be costly and protracted.

       

In the meantime, I noticed a strange thing - at the bottom on both side walls there are mounts for the lower shelf, but the shelf was not ... Can anyone provide a photo or other information about the type and design of this shelf? Thank you .

       
#5

I cannot be sure but those could be shipping hardware and not the shelf mounts.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#6

Maybe Michael. Last night I searched the Internet for a photo of this model and did not find the bottom shelf anywhere. The lower shelf was only in more powerful versions with resonators and a 6l6 amplifier. So it seems that there should have been no regiment here.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Eico 368 TV/FM Sweep Generator
Ron, for the future: In order to change the name of teh topic, 1. Go to the very first post. 2. Hit "Edit...morzh — 04:29 PM
6TPZ and 5TPO Radio Help
Transistors are easy. No converters. If you have input voltage, then just put some signal through. Or touch your fin...morzh — 04:25 PM
462ron
Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM
6TPZ and 5TPO Radio Help
Since these radios operated in harsh environments (temp changes and vibration) you could touch a soldering iron to all t...GarySP — 03:18 PM
6TPZ and 5TPO Radio Help
Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM
Heathkit Sweep Generator TS-4
Ron Instead of Quick reply, go to New Reply, then go to the title of the very first post, and change the title text the...morzh — 02:00 PM
6TPZ and 5TPO Radio Help
I am not a specialist in car radios. I suspect they might use vibrators to convert 12V to acceptable tube voltages, so ...morzh — 01:58 PM
6TPZ and 5TPO Radio Help
Welcome to the Phorum, R3Sons! I have very limited experience with car radios other than installing custom radios back ...GarySP — 01:08 PM
462ron
OK, I need to rename this thread to say..Eico 368 TV/FM Sweep Generator instead of the current title..Heathkit Sweep Gen...462ron — 12:49 PM
6TPZ and 5TPO Radio Help
Hello, I have a Philco (Ford) 6TPZ and a 5TPO radio.  I replaced the electrolytic capacitors in both.  I have the SAMS m...R3Sons — 12:29 PM

[-]
Who's Online
There are currently 10292 online users. [Complete List]
» 2 Member(s) | 10290 Guest(s)
AvatarAvatar

>