Did Philco Make a Good AM-FM Table Radio?
Posts: 2,033
Threads: 367
Joined: Jun 2010
City: Dover, OH
I thought I would ask this seeing as I now have a couple good Zeniths and finally have a good RCA AM-FM table radio in my stable. Did Philco make a good AM-FM table radio and what model would it be? So far I have only seen small units in poor shape around here, so the jury is out on that for me. It seems odd to have two of what I consider the original 'Big Three' of radio sales represented without a Philco example.
No matter where you go, there you are.
Posts: 1,531
Threads: 242
Joined: Sep 2012
City: West Bend, Wisconsin
Well I guess it depends on what year you're interested in. The first table model with FM is one of the best, the 48-482. A huge beast, basically a console in a table model. Has AM/FM and short wave.
Greg V.
West Bend, WI
Member WARCI.org
Posts: 2,033
Threads: 367
Joined: Jun 2010
City: Dover, OH
Year doesn't really matter here, just in the tube era I would say. I have seen a few 48-482's in my area over the years, but they are usually trashed like most other late 40's Philcos are that I find around here. Also, it seems people's pets and kids loved to rip out both the grill cloth and the speaker cones in units I see.
No matter where you go, there you are.
Posts: 5,141
Threads: 272
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
The 48-482 I restored had a great sound. Gave it away as a gift.
Posts: 1,247
Threads: 32
Joined: Jan 2014
City: Wellborn Florida
I would vote for Philco model 53-956 my only Philco AM FM. Found at the local flea market summer of 2011.
Posts: 4,418
Threads: 417
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
I have often been leery of FM Philco due to their reluctance to pay for the "Armsrong System".
Paul
Tubetalk1
Posts: 2,033
Threads: 367
Joined: Jun 2010
City: Dover, OH
Thanks for the advice thus far. I almost bought a model 53-956 a few years back, but was a bit hesitant at the time and missed out. I was looking at a nice condition 49-906 with a bad cord today, but am trying to research that one first. I have a big Philco AM-FM and it's matching console from 1948 that both use two 117Z3 rectifier tubes. The console is fair, but tries to play and the table unit has a livable cabinet, but the best way to describe the inside is 'bio-hazard'. Some critters made a mess in there! In spite of that, it tried to power up and I got a little audio out of it. Not sure what to do with those two.
Edit: They are 1949 models. The table 'bio hazard' one is a 49-909 and the console is either a 49-1100 or 49-1101. Had them for a while.
No matter where you go, there you are.
(This post was last modified: 09-15-2020, 02:55 PM by Jayce.)
Posts: 4,418
Threads: 417
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Maybe clean out the old nest, and then give it a check up. Paul
Tubetalk1
Posts: 2,033
Threads: 367
Joined: Jun 2010
City: Dover, OH
There's no nest, just plenty of droppings... Chassis isn't too bad, but the screws that hold the chassis in on one side are totally rusted. If I could get it out I MIGHT have a chance to clean out the cabinet and chassis. I don't think it was mice that left the crap in this radio, it almost looks like from birds or other critters.
No matter where you go, there you are.
Posts: 4,418
Threads: 417
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Wear a mask and gloves, wipe it out with alchohol on a rag or such. Be careful.
Paul
Tubetalk1
Users browsing this thread:
|
Recent Posts
|
Gloritone 27 Radio
|
I have a model 27 that someone painted the cabinet brown. I've been trying to sell it for awhile but the cabinet paint m...Jim Dutridge — 02:30 PM |
Restoring Philco 96
|
Joseph
Yeah. The situaction is complicated by me living with my family in NJ while mom is in FL.
Were it not for my ...morzh — 10:55 AM |
Restoring Philco 96
|
Best of wishes for your mother. I hope she recovers well. My mother struggles with sciatic pain as well, so I am familia...jrblasde — 10:41 AM |
Restoring Philco 96
|
Well, because I am away, I cannot check it. Hope mom becomes better enough for me to get back.
I think I will be here f...morzh — 10:27 AM |
Restoring Philco 96
|
Nice find! I hope it completes your console.jrblasde — 08:45 AM |
Gloritone 27 Radio
|
Hello john,
That, is the first time I have have seen or heard of that brand and model.
Welcome to the party !!
Sincer...radiorich — 08:08 AM |
370 Norman Bel Geddes trim pieces
|
Thank you! I’ll probably use the half-round molding and tone it to match the original. Thanks for the replies!Max T — 06:34 AM |
Gloritone 27 Radio
|
I'm kind of late to this thread, but Buzz1151 has a 3 part restore series on the model 27:
A little bit of extra t...Eliot Ness — 05:48 AM |
370 Norman Bel Geddes trim pieces
|
You can get half-round moulding in various diameters at any home improvement store. That way the flat edge is uniform. ...GarySP — 12:03 AM |
42-345 Resistors
|
Great comments.
I have a tinkering bench at my office, and that's where Little Phil is right now. I will have to comb ...proftrussell — 11:12 PM |
Who's Online
|
There are currently no members online. |
|

|