11-27-2021, 08:06 PM
The info I got says: 36 AWG wire/14.75 turns/lug 3 to ground/wind from top CC.
Looking for 2 ohms & 3.2 ohms. Does that sound right?
Looking for 2 ohms & 3.2 ohms. Does that sound right?
|
Philco 84b confusion
11-27-2021, 08:50 PM
Sound good. Nowhere near 101 ohms.
When my pals were reading comic books I was down in the basement in my dad's workshop. Perusing his Sam's Photofoacts Vol 1-50 admiring the old set and trying to figure out what all those squiggly meant. Circa 1966 Now I think I've got! Terry
11-28-2021, 02:57 AM
Nice 2nd gen set! Worked on one last yr https://philcoradio.com/phorum/showthread.php?tid=20433 Here's a 1st gen set 1st gen Model 84 (philcoradio.com) The chassis are the same.
When my pals were reading comic books I was down in the basement in my dad's workshop. Perusing his Sam's Photofoacts Vol 1-50 admiring the old set and trying to figure out what all those squiggly meant. Circa 1966 Now I think I've got! Terry
11-29-2021, 02:15 PM
Having been involved with steam locomotive restoration as well as radio refurbishment, radio is definitely the less taxing of the two. The common thread is that of returning something old to usefulness, while employing skills that are in danger of being forgotten. There’s a lot of satisfaction to be derived!
11-29-2021, 08:31 PM
Rob, apologies, I forgot to comment in my last post how nice a condition that chassis is in and how nice your work looks. The spiral wrap around "in air" connections is a very nice touch!
"Do Justly, love Mercy and walk humbly with your God"- Micah 6:8 "Let us begin to do good"- St. Francis Best Regards, MrFixr55
11-30-2021, 01:46 AM
Thanks! My wife found the spiral wrap. It works very well when covering wire that’s been soldered between parts.
12-06-2021, 10:30 PM
Hi Guys- The 38 AWG wire came today so I’m (hopefully) back at the Philco 84. Are the transformer primaries (oscillator and antenna) wound in the same direction or the opposite direction from the secondaries? Inquiring minds……….. Thanks! - Rob
12-07-2021, 05:04 PM
Eureka! Got the radio up and running. Still have to do an alignment and check some voltages. Thanks again for the help. It wouldn’t have happened without you! - Rob
P.S.- Antenna suggestions? 
12-07-2021, 06:09 PM
Hi Rob,
There's a thread from some time ago where members volunteered their successes on conventional and non-conventional antennae. I'm sure you can find it with a search. It is quite extensive. 
12-07-2021, 06:41 PM
You might be referring to this one?
https://philcoradio.com/phorum/showthread.php?tid=19673 Here's another. https://philcoradio.com/phorum/showthread.php?tid=870 and one from my blog: https://ronsradios.com/2020/08/29/give-y...-some-air/ -- Ron Ramirez Ferdinand IN
« Next Oldest | Next Newest »
Users browsing this thread: 11 Guest(s) |
|
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
