Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Delco car radio set?
#1

Hi everyone, I realise that a photo of the set in question would make this easier and I hope to post one soon. But in the meantime someone may recognise this set from my description.The bloke I bought it from said he thought it had come out of a Chev.It is certainly American. The vibrator is 6 volt. So , so far it could be any set. But several tubes are Delco brand.And the valve lineup is a little unusual, using 7 pin miniature valves up to the detector and an octal 6V6 for output. Rectifier is a 6X5.The miniature valves are retained in their sockets with a natty spring clip like a spiral , in the centre hole of which  is lodged the  pinch or sealing knob of each valve. I have not come across these clips before.It is permeability tuned with black plastic buttons.The speaker output is via a single ceramic RCA socket . I had hoped to find a paper tag inside giving some clue but....nothing. Valve lineup is 6BA6,6BE6,6BA6,6AT6,6V6, 6X5 .If anyone can offer any pointers I'd be grateful.
#2

Try going to radiomuseum.org and enter your tube list in the appropriate search box. Leave a space between each one. I got 36 hits and half are car radios. Most are from the 1950s.




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM
Var resistor id
Considering what it is in series with, I doubt there should be any power requirements. Of course, we should know wher...morzh — 03:23 PM
Var resistor id
Trim pot, about 1/2 watt part of focus divider. As stated 2k ohms. This appears to be a rusty chassis, resolder all ...Chas — 03:19 PM
Var resistor id
Its a Sylvania 400 oscilloscope. here is a clip of r-100. Would be nice to know the current required. Not listed in part...Martinj — 02:10 PM
The list of my radio & TV collection!
Thanks Richard. I hope you enjoy it. Here I have created an English section on the history of radio with videos in Engl...RadioSvit — 10:23 AM
The list of my radio & TV collection!
Hello RadioSvit, first all happy new year ! I will watch your new videos this week. Sincerely Richardradiorich — 09:19 AM

[-]
Who's Online
There are currently 10162 online users. [Complete List]
» 1 Member(s) | 10161 Guest(s)
Avatar

>