Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

RCA WV-98c
#31

strange. It should have more even to the GND, and the GND is 1M to the case.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#32

Are you saying if I measure ohms from the ground lead to case it should be 1m ohms? That low resistance tells me there is a leak to ground, right?
#33

Well, in the sch you provided (there is something missing at the very bottom, but I think it is GND), the sole connection to the case shown is the 1M resistor R31, which is used to bring the case and the GND under the same potential.
Unless I am missing something.

Of course there is a cap across that R31. And it could be bad. Or, again, we are missing something.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#34

I guess I need to look at r31 and C7.


Attached Files Image(s)
   
#35

That too.
There might be other things.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#36

Interesting readings, r31 common ground to case bounced to 1meg on analog meter, r31 common to case bounced to 1meg. R31=1meg.  Across c7, which is common to case with a parallel resistor = 40k ohms steady.
#37

My resistance readings are not even close. Worried about pins 1 and 6. Even though they are off, the meter works on dc 50v and higher.
#38

>>r31 common ground to case bounced to 1meg on analog meter, r31 common to case bounced to 1meg.

Would you re-read and correct?
This does not make sense.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#39

Check all your caps. Even ceramics. I am not sure what is going on.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#40

Just occurred to me: what if you have a power transformer leak? From a, say, secondary to the case. If it is bolted to teh case.
Not sure how to better check it.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#41

Thats a good thought but the secondary does go to ground via R30 27k resistor.
#42

Yes.....it would connect GND to case, and you do have 1MOhm.....

I am not sure how the wiper has resistance to the case.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#43

From now on iam using an analog meter. R31 removed is 1 meg and c7 .01 but chassis to common is 600k. Why is that?
#44

Are you saying the Chassis to GND became LESS when you removed the R31?
And we are sure the C7 and other caps are not leaking?

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#45

Yep, hunting down the source. Will get back to you. Thanks




Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM
Var resistor id
Considering what it is in series with, I doubt there should be any power requirements. Of course, we should know wher...morzh — 03:23 PM
Var resistor id
Trim pot, about 1/2 watt part of focus divider. As stated 2k ohms. This appears to be a rusty chassis, resolder all ...Chas — 03:19 PM
Var resistor id
Its a Sylvania 400 oscilloscope. here is a clip of r-100. Would be nice to know the current required. Not listed in part...Martinj — 02:10 PM
The list of my radio & TV collection!
Thanks Richard. I hope you enjoy it. Here I have created an English section on the history of radio with videos in Engl...RadioSvit — 10:23 AM
The list of my radio & TV collection!
Hello RadioSvit, first all happy new year ! I will watch your new videos this week. Sincerely Richardradiorich — 09:19 AM

[-]
Who's Online
There are currently 4845 online users. [Complete List]
» 1 Member(s) | 4844 Guest(s)
Avatar

>