Posts: 803
Threads: 42
Joined: Dec 2008
City: Chicago, IL
I finished repairing the panel and applied some new veneer. I wanted to use some flat cut like the original, but only had quarter cut on hand.
I used the old trick of applying wood glue to both surfaces and letting them dry. Then used heat to reactivate the glue while applying pressure with a J-roller.
Once the grain filler dries overnight, I'll start on the lacquer.
[Image: http://farm7.static.flickr.com/6111/6212...6df4fc.jpg]
[Image: http://farm7.static.flickr.com/6225/6212...968a7f.jpg]
[Image: http://farm7.static.flickr.com/6178/6212...5ba84e.jpg]
[Image: http://farm7.static.flickr.com/6162/6212...f12b39.jpg]
Posts: 335
Threads: 50
Joined: Apr 2011
City: Apple Creek
State, Province, Country: Ohio
Great work, once I get my 71 up and running I'll be working on the many cabinets that need attention. Your work is very inspiring.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Yes, I like this series of entries too! Great work on your cabinet!
Posts: 803
Threads: 42
Joined: Dec 2008
City: Chicago, IL
Thanks guys!
I sprayed some toner and clear gloss on the panel. Then, painted the edges dark brown.
I painted the sides of the speaker slats dark brown too.
[Image: http://farm7.static.flickr.com/6171/6228...3732_z.jpg]
Posts: 803
Threads: 42
Joined: Dec 2008
City: Chicago, IL
I gave the whole cabinet a light sanding with 400 grit then spray on a couple more coats of Deft gloss. I'll wait a couple weeks then rub it out.
I'm also going to go over the dark brown paint on the edges with some satin lacquer to knock down the shine.
[Image: http://farm7.static.flickr.com/6159/6236...9fcd_z.jpg]
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Looks like you've done a fine job with that cabinet. It appears to be coming along quite nicely.
--
Ron Ramirez
Ferdinand IN
Posts: 4,806
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
The back porch looks like it cleaned out nicely as well.
Regards
Arran
Posts: 803
Threads: 42
Joined: Dec 2008
City: Chicago, IL
That's actually up in the attic. There's a convenient exhaust fan nearby but it's not heated so I only have a short window left before it's too cold to spray.
Posts: 4,806
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
bandersen Wrote:That's actually up in the attic. There's a convenient exhaust fan nearby but it's not heated so I only have a short window left before it's too cold to spray.
Oh well then the attic came out nicely as well as the cabinet, that linoleum looks like it got mopped down.
Regards
Arran
Posts: 4
Threads: 1
Joined: Dec 2012
City: North Texas
Did you apply a stain before you applied the grain filler? If so, how? by brush or rag?
Thanks,
Posts: 803
Threads: 42
Joined: Dec 2008
City: Chicago, IL
Nope, no stain - just a little lacquer sanding sealer. I used Mohawk Medium Brown Walnut toner lacquer to give it some color.
Posts: 4
Threads: 1
Joined: Dec 2012
City: North Texas
Great! I am using this as my guide for my first resto... Keep up the good work!!
Posts: 803
Threads: 42
Joined: Dec 2008
City: Chicago, IL
Thanks. I think I'll pull out the chassis soon and finally try to get it running
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Have fun with the cone-centric tuning!
Posts: 803
Threads: 42
Joined: Dec 2008
City: Chicago, IL
Wow! I can't believe it's been 3 years since I started this project! I did slight sanding and sprayed on a couple final coats of gloss lacquer yesterday. I'm very happy with how this cabinet turned out will be installing the restored chassis soon
[Image: https://farm4.staticflickr.com/3869/1479...f396_c.jpg]
(This post was last modified: 08-01-2014, 11:44 PM by
Bob Andersen.)
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
