Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

40-160 escutcheon
#1

I have recently acquired a 40-160 but the escutcheon covering the dial and 6 push buttons is missing. Does anyone know where I might possibly get these parts?
#2

jetmech7860 Wrote:I have recently acquired a 40-160 but the escutcheon covering the dial and 6 push buttons is missing. Does anyone know where I might possibly get these parts?

As far as I know the only source for these parts would be a parts set or parts salvaged from a parts set. You should be able to find the pushbuttons, as they are bakelite, but finding a good escutcheon may be a problem. The original escutcheons used on the 40-158, 40-160, and 40-165 consoles were made out of a type of plastic that has a habit of warping and cracking (some say it's Tenite) and as far as I know nobody is reproducing that style of escutcheon. Very likely the only thing you could do is to make a suitable facimile with either sheet brass, or plastic, or possibly wood. This is strange as most of the Philco models from 1940 used some form of brass escutcheon but these sets were the exception, the 1941 and 42 models were just the opposite with most escutcheons being made out of plastic.
Regards
Arran




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 91 Restore Code ??
I have two schematics for this radio one shows the 47 block (126-226) and the other (121-221) does not. My radio does no...dconant — 02:32 PM
Philco 91 Restore Code ??
No, that cannot be the 47. The 47 is a regular backelite block cap. Look at the chassis picture, it is shown there. Rig...morzh — 01:45 PM
Philco 91 Restore Code ??
I have changed the title of this thread from Philco 91 Schematic. I have gone through most of the cap replacements. I...dconant — 01:26 PM
462ron
Here is an online transistor substitution site… Ron462ron — 08:44 AM
1930s Stewart-Warner Tombstone Radio need help identifying model number
One way to repair a broken wire on a coil is to take a copper strand out of some 18 gauge electrical cord, make a &quo...captainclock1988 — 12:55 AM
B&K 1077B no video
Hello Tim, I once had a Jcpenny 13inch tv /monitor built by NEC come into my repairshop it would start acting up at tim...radiorich — 10:59 PM
Restoring Philco 96
Mike; The last time I took a potted condenser can apart, and it was maybe 1/4 the size of the one in the model 96, I ...Arran — 10:56 PM
Compatible crts
Bob Andersen — 08:58 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
One way to repair a broken wire on a coil is to take a copper strand out of some 18 gauge electrical cord, make a "...Arran — 08:41 PM
Restoring Philco 96
Have just aligned it. Surprisingly, it was not that much off at all. Barely. Aligning TRF sets is pure pleasue, as ther...morzh — 07:52 PM

[-]
Who's Online
There are currently 2966 online users. [Complete List]
» 3 Member(s) | 2963 Guest(s)
AvatarAvatarAvatar

>