Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Zenith 10-S-599
#1

Just picked this up this evening from another collector. Radio repair friend called me about it last night.[attachment=1][attachment=0]
The other collector was wanting to part this unit out as he seems to have a dislike for the radio-phono sets. My buddy had done the basics on the chassis, replacing the shorted put 6x5's and electrolytics, only to find the radio is a very good performer without touching anything else. In fact it played for over 6 hours the yesterday without issue and played great this evening as well. He didn't see a reason for it to get chopped up for parts and called me, since I seem to have a soft spot for these units. So, now it is sitting in my bedroom down here in the house. If it performs here as well as it did up there, I will no longer have a reason to miss Marion's Attic! Icon_thumbup

No matter where you go, there you are.
#2

Nice find, Jay! Icon_thumbup
#3

I'm glad your friend called you. Sounds like he is a real friend. That looks pretty nice. It would have been such a shame to part out a perfectly nice console with a great radio.
#4

Tom Hamilton Wrote:I'm glad your friend called you. Sounds like he is a real friend. That looks pretty nice. It would have been such a shame to part out a perfectly nice console with a great radio.
Yeah, he is. He figured I might be interested in it and I bit. The guy who owned it wanted $200 though and I almost balked until I heard it playing. Yeah, might have gotten better on the price but it has become my daily driver radio.

No matter where you go, there you are.
#5

Not a Zenith fan but that set looks complete even down to the original record changer, why part something like that out? It even looks like the burl or stump walnut is real, many Zeniths from this era used that cheesy dienoc faux finish in place of that sort of veneer.
As for the 6X5s, lets just say that Zenith did some very stupid things with their power supply designs in both radios and TV and using a pair of 6X5s in place of a 5Y4/5Y3/80 was just a bad design, along with using undersized power transformers in their sets.
Regards
Arran
#6

That's what my friend and I thought, it's too good to part out. The grille does use the photo-finish on it, but it's in really good shape. Has a little flaking, but considering this radio came out of a damp basement, that's not bad at all. Cabinet-wise, it's in good condition. A few minor veneer chips on the front, missing one door knob. There is a big chunk of veneer gone off the back top that I will have to address, but seems common for the Zeniths I find around here. The venneer has curled a bit on the one record storage door, but not bad. I am going to remove the door soon and reglue that back down.

No matter where you go, there you are.




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco 91 Restore Code ??
No, that cannot be the 47. The 47 is a regular backelite block cap. Look at the chassis picture, it is shown there. Rig...morzh — 01:45 PM
Philco 91 Restore Code ??
I have changed the title of this thread from Philco 91 Schematic. I have gone through most of the cap replacements. I...dconant — 01:26 PM
462ron
Here is an online transistor substitution site… Ron462ron — 08:44 AM
1930s Stewart-Warner Tombstone Radio need help identifying model number
One way to repair a broken wire on a coil is to take a copper strand out of some 18 gauge electrical cord, make a &quo...captainclock1988 — 12:55 AM
B&K 1077B no video
Hello Tim, I once had a Jcpenny 13inch tv /monitor built by NEC come into my repairshop it would start acting up at tim...radiorich — 10:59 PM
Restoring Philco 96
Mike; The last time I took a potted condenser can apart, and it was maybe 1/4 the size of the one in the model 96, I ...Arran — 10:56 PM
Compatible crts
Bob Andersen — 08:58 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
One way to repair a broken wire on a coil is to take a copper strand out of some 18 gauge electrical cord, make a "...Arran — 08:41 PM
Restoring Philco 96
Have just aligned it. Surprisingly, it was not that much off at all. Barely. Aligning TRF sets is pure pleasue, as ther...morzh — 07:52 PM
6TPZ and 5TPO Radio Help
1 - 0v - correct 2 - 0v - correct 3 - 0v - --------------------- both 3 and 4 should be the same. Check L2 for being ope...morzh — 05:15 PM

[-]
Who's Online
There are currently 3702 online users. [Complete List]
» 3 Member(s) | 3699 Guest(s)
AvatarAvatarAvatar

>