Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 48-200 help
#1

Low volume and garbles. Down to looking at Z300. Removed it and found Z300D and Z300C not in the can. R300 is in there and found 470K actually at 54K so I'll replace it, but what do I do with the missing caps? Should I put them in or leave as is. Funny thing is, it doesn't look like the I.F. can has ever been messed with, prior to my fat fingers intruding that is. Schematic at the following link....

http://www.nostalgiaair.org/PagesByModel...013627.pdf

Danny
#2

I assume you mean C300C and C300D, both are 100 pF caps which, with R300, comprise the 10kHz audio "tweet" filter.

Strange they would be missing. Putting in new silver-mica types back in certainly won't hurt.

Be sure that 2nd. IF can has a part no. of 32-3952, according to the parts list. Maybe the set had an early repair/replacement in its llife and that can is same IF freq. but different part number.
#3

Thanks for the info Chuck. Part # on the can is 32-3952. I'll go ahead and install them as you suggest.

Danny




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
462ron
OK, I need to rename this thread to say..Eico 368 TV/FM Sweep Generator instead of the current title..Heathkit Sweep Gen...462ron — 12:49 PM
6TPZ and 5TPO Radio Help
Hello, I have a Philco (Ford) 6TPZ and a 5TPO radio.  I replaced the electrolytic capacitors in both.  I have the SAMS m...R3Sons — 12:29 PM
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM
Var resistor id
Considering what it is in series with, I doubt there should be any power requirements. Of course, we should know wher...morzh — 03:23 PM
Var resistor id
Trim pot, about 1/2 watt part of focus divider. As stated 2k ohms. This appears to be a rusty chassis, resolder all ...Chas — 03:19 PM
Var resistor id
Its a Sylvania 400 oscilloscope. here is a clip of r-100. Would be nice to know the current required. Not listed in part...Martinj — 02:10 PM

[-]
Who's Online
There are currently 8830 online users. [Complete List]
» 3 Member(s) | 8827 Guest(s)
AvatarAvatarAvatar

>