Posts: 193
Threads: 50
Joined: Oct 2011
City: York PA
I wish that I could say that this cap box re-stuffing made a big difference to justify the effort, but my 95 deluxe highboy still sounded good   . If you're interested, I used the method of detaching the box from the chassis and then reaching in with wire cutters and snipping all of the wires. This is easier said than done, but the results are worth it. The wires and resistors underneath the chassis stay put. This went so well, maybe I could make these and sell them? 
[Image: http://i191.photobucket.com/albums/z309/...ile-45.jpg]
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
Crispty critters. Great save.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Yes. but at least it will sound good longer.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
"A 3 hour chore"........?
There's a song in there somewhere......
Maybe take the "Gilligan's Island" theme and replace "three hour tour" with "3 hour chore?"
Posts: 438
Threads: 15
Joined: Jul 2008
City: Anacortes, WA
"Just sit right back and you'll hear a tale
A tale of a well-spent day
That kept a Philco 95
From being thrown away..."
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
HA!!! Perfect !!!!!!! 
Posts: 438
Threads: 15
Joined: Jul 2008
City: Anacortes, WA
"The tech was a sold Philco fan,
Both table-top and floor
He started out with confidence
on a three-hour-chore..."
(Anyone else wanna run with this? )
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Great job DK but dang, what a mess of tar! From the look of the pieces I would guess you had to chip the thing out. Well done. Mine as well but also, no change in how my 111 works ( poorly) but at least in didn't get worse. On to the rest of the chassis.
Good luck. Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 244
Threads: 11
Joined: Oct 2011
City: Black Mountain, NC
The winds started running rough,
The might dipole was tossed.
If not for the courage of the fearless op,
The Philco would be lost.
Cossor 3468
GE 417A
Philco 118H
Radiola 17/100
Scott 800B6
Silvertone 6130
Stromberg 535M
Truetone D1952
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Jerry, it should work very well when you are done. Get all of those Grey/ yellow and grey resistors changed out and the rest of the caps.
(This post was last modified: 08-20-2012, 12:57 PM by Phlogiston.)
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Ha ha ha ha ha!! Looks like the beginning of a band!  
Providing my arthritis and spasms cooperate, I can do guitar/bass work!
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
Yeh, recarbonate, or recarbonize, whichever you prefer whilst recapping. C'mon it's mine.
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
A Marconi model 86
|
| >>What a behemoth!
A Juggernaut.morzh — 07:47 PM |
|
Philco 70 antenna lead
|
| I am not sure I understood about the coils and the mush. I looked an more than one coil in 20, 70, 90, 60, Zeniths and ...morzh — 07:46 PM |
|
A Marconi model 86
|
| :e_biggrin: What a behemoth! I hope the final result is as much a quality sounding example! Keep us posted on your pro...GarySP — 07:32 PM |
|
A Marconi model 86
|
| I should add that the double conversion may only be used on the shortwave bands, but I haven't looked at the schematic t...Arran — 07:27 PM |
|
Philco 70 antenna lead
|
| Yes, that wire will not pick up much interference as routed - the RF at that level won't be affected, and if you have st...radio1 — 07:26 PM |
|
Philco model 60
|
| I'm also a member of MARC. Did you attend the Vintage Electronics Expo in Waterford, MI last month? That's where I got...GarySP — 07:22 PM |
|
A Marconi model 86
|
| Dan
Double conversion is using two IF converters instead of one. This improves the image response.
morzh — 07:15 PM |
|
A Marconi model 86
|
| Thanks Arran;
I don't even know what a double conversion is, but i do have a good friend In Nova Scotia
that would k...Dan Walker — 07:01 PM |
|
A Marconi model 86
|
| Dan;
I've seen some Marconi sets like that before, one was a console though I'm not sure if it was a model 86. It's a...Arran — 05:09 PM |
|
An attempt to remove the Field Coil from a G speaker
|
|
Milkjug plastic?
Whatever is chosen for the spider, the material must be compatible with popular adhesives...
Th...Chas — 05:05 PM |
|
Who's Online
|
There are currently 3713 online users. [Complete List]
» 1 Member(s) | 3712 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
