Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

I've got a 610! Schematic?
#1

Hi Pholks!

I'm brand new to the Phorum, and brand new to radios. I have been building tube guitar and some hi-fi amps for a few years.

I'm here because a friend gave me her Philco, a 610 as I just discovered (see pic), and I'm looking to do a bit of restoration. From the photos, you'll see that it's in pretty good shape, and that someone has done a partial recap at some point. I brought it up on the variac w/ light bulb limiter, and it works! I was able to tune in several AM stations.

I've been soaking up some info here, so I have some idea what I'm in for, rebuilding bakelite blocks and such. Alignment sounds scary, but I'll burn that bridge when I come to it. The question I have at the moment is, do I have the right schematic. This is the closest I've found. It almost matches my tube complement. I've got a 41 output tube, it shows a 42. Would that be a common production variation? Or maybe whoever worked on it before changed tube types? Any clues much appreciated.

I'm excited! My first old radio! Until a few days ago I couldn't have told you what a field coil was. What? There weren't always permanent magnets?? Icon_biggrin

John

[Image: http://grandpaslab.com/wp-content/upload..._front.jpg][Image: http://grandpaslab.com/wp-content/upload...430910.jpg][Image: http://grandpaslab.com/wp-content/upload...03/016.jpg]
[Image: http://grandpaslab.com/wp-content/upload...490200.jpg][Image: http://grandpaslab.com/wp-content/upload...03/015.jpg]
#2

Hi and welcome!

Yes, you have a 610B, and yes, the schematic you have is a 610 schematic.

The 610 underwent numerous circuit changes during production. In order to have all of these, I suggest you order the service pack for this set from Chuck - well worth the $7 cost.

http://www.philcorepairbench.com/

A 41 will substitute for a 42 in a pinch, but it's best to use the proper 42 tube. The characteristics of the two are not exactly alike, plus the 41 has lower output power.

--
Ron Ramirez
Ferdinand IN
#3

Thanks, Ron. I've placed my order with Chuck, and found what looks to be a good 42 for a reasonable price on eBay.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
An attempt to remove the Field Coil from a G speaker
Gary I in fact did, on a 38-14, I think, where I had a speaker with the dead coil. Well...it kinda worked. Kinda, be...morzh — 10:38 PM
An attempt to remove the Field Coil from a G speaker
Mike, what ever happened to that plan you had to try using a rare earth magnet to magnetize the pole? This looks like a...GarySP — 10:25 PM
RCA T62 is playing.....
Beautiful set.morzh — 09:07 PM
An attempt to remove the Field Coil from a G speaker
Well....here it is. The green stuff. Unfortunately, probably penetrates deep. I opened the top layer and saw that: ...morzh — 08:58 PM
Philco 91 Restore Code ??
:clap: :clap: :clap: :clap: Really nice workmanship!!! Top of the chassis looks great. Sorry about the long winded e...MrFixr55 — 08:09 PM
Philco 40-120C Restoration
Thank you for your reply. I will check voltages on the other tubes, look at resistor 23 and cap 25, etc. If all else fai...bluecap — 07:58 PM
RCA T62 is playing.....
Nice looking set great save. DavidDavid — 07:48 PM
Philco 89 indicator light.
Hello Jim, I have done several 89s. The trick is to move the drum in or out on it's shaft. You will need to loosen a set...dconant — 07:36 PM
An attempt to remove the Field Coil from a G speaker
MrFixr Yes, it is my plan to go with 45rpm spider if I go that far. No, the pole was not left-handed as I unscrewed ...morzh — 07:14 PM
Philco 40-120C Restoration
Change the tube. Check the tube's bias network. Are any other tubes experience the drop or just this?` Is resistor 23 OK...morzh — 07:09 PM

[-]
Who's Online
There are currently no members online.

>