The Philco Radio Story on Video
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
This video, featuring a silent film from 1929 shot in the Philco factory at Ontario and C Streets in Philadelphia was available for several years on VHS tape. I think that it was on DVD at least briefly. It appears the company which produced the video, Encore Home Entertainment, has gone out of business as I can no longer find a website for them. Encore is still around and still selling the video - see post #14 below.
Anyway, Codefox brought it to my attention that the video is now available on YouTube. The resolution is not great, but viewable.
You can watch it here, or click the YouTube logo in this thumbnail to watch it on the YouTube site:
[Video: https://www.youtube.com/watch?v=kanPsUDyKrU]
--
Ron Ramirez
Ferdinand IN
Posts: 2,031
Threads: 367
Joined: Jun 2010
City: Dover, OH
Hmm, another reason for me to hope we will be finally able to get DSL next week! 
No matter where you go, there you are.
Posts: 403
Threads: 40
Joined: Feb 2011
City: McPherson, KS
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
So Ron, Is that a model 87 they're putting together??? Didn't see any holes for the grid leads in the coil shields.
Terry
Posts: 4,801
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
I think there may be a similar silent film showing a tour of the old Rogers-Majestic plant in Toronto, but I have never seen any more of it then some footage of the outside of the plant and Ted Rogers in his office. I've heard of the Philco factory tour, and have seen ones put out by RCA, I think there may also be one of the Atwater Kent plant in Philadelphia as well.
Regards
Arran
Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
Hi Ron
That was really interesting, thanks for posting I really enjoyed it 
Joe
Joe Bratcher near Louisville, KY
Posts: 309
Threads: 55
Joined: Oct 2011
City: Claremont, NH
Interesting video! I don't have an 87, but I have (I know I said I wasn't buying anymore  ) model 65 in that cabinet. Hey, it was only $20, so how could I turn it down?
Gene
(This post was last modified: 03-10-2013, 10:13 AM by Gene Pederson.)
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
I've got an 87 and a 95 with that cabinet too.
Terry
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Nice video and I'm looking for a 95 highboy. Seem either hard to find or very expensive.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Neat!
Posts: 40
Threads: 5
Joined: Apr 2008
Ron, Loved the video. Much better than expected. Thanks again.
Dave D
Posts: 1,407
Threads: 72
Joined: Oct 2007
City: Linn Creek, MO
How things have changed, OSHA would have a hayday in that factory! The total lack of machine guarding and the guy spraying lacquer with no respirator.
Steve
M R Radios C M Tubes
Posts: 52
Threads: 1
Joined: Mar 2013
City: Minneapolis, MN
Thanks. It impresses everybody.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Hold the phone, folks. Encore Home Video is still around and still selling the PHILCO video on DVD:
http://encorehomevideo.com/radio/philco.html
--
Ron Ramirez
Ferdinand IN
Users browsing this thread: 3 Guest(s)
|
|
Recent Posts
|
|
Philco 91 Tuning Condenser
|
| I thought you meant the actual dial....there are rivets.morzh — 08:42 PM |
|
6TPZ and 5TPO Radio Help
|
|
This is what I meant.
I would start from touching Test Point 12 on the sch.
See if you hear hum.morzh — 08:37 PM |
|
6TPZ and 5TPO Radio Help
|
|
Here are the links. 6TPZ and 5TPO
The speakers are good. I've tried several known good ones. I just have to fi...R3Sons — 06:27 PM |
|
Philco 91 Tuning Condenser
|
| I just found a set screw. Was able to turn dial just enough to see it and loosen it. I have it off now.dconant — 06:14 PM |
|
Philco 91 Tuning Condenser
|
| Hello,
Does anyone know how the dial plate comes off the tuning condenser shaft? The dial itself id so warped I can't...dconant — 06:01 PM |
|
Eico 368 TV/FM Sweep Generator
|
| Ron,
for the future:
In order to change the name of teh topic,
1. Go to the very first post.
2. Hit "Edit...morzh — 04:29 PM |
|
6TPZ and 5TPO Radio Help
|
| Transistors are easy.
No converters. If you have input voltage, then just put some signal through.
Or touch your fin...morzh — 04:25 PM |
|
462ron
|
| Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM |
|
6TPZ and 5TPO Radio Help
|
| Since these radios operated in harsh environments (temp changes and vibration) you could touch a soldering iron to all t...GarySP — 03:18 PM |
|
6TPZ and 5TPO Radio Help
|
| Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
